Blockchain Explorer - Search the Blockchain BTC ETH BCH

Bitcoin-QT should have a way to choose blockchain save location by now...

The years are ticking by and the Gigabytes are stacking up and still Bitcoin-QT has no built in feature to change the save location from c:\ to something else. Why has this problem not been addressed yet? I have spent some time trying to change the directory with little success.
This is crippling the use of Bitcoin-QT for something that should be very easy to change. My SSD is not enjoying this Gavin :(
submitted by TeachAChimp to Bitcoin [link] [comments]

Guide for novice crypto investors

Bitcoin is a decentralized system, any user of which could control the movement of their own funds. You can use the currency to make transactions, pay for purchases, receive transfers, and exchange it for cash. For transactions, a special address is used, encrypted with a 16-character key. The buyer decodes the code to transfer bitcoins to the specified address.

Bitcoin Mining

Mining is a process that ensures the security of the BTC system, which adds new blocks to the blockchain in chronological order (new transactions). Blocks are added when the codes are decrypted, the transaction is completed, and bitcoins are transferred or exchanged.
The main cryptocurrency is generated by miners using software that solves cryptographic problems. The reward for a new block is agreed by all network participants, but usually amounts to 12.5 bitcoins. Part of the user fees for transactions also goes to reward the miners. Cryptographic tasks become more complex every year to prevent inflation (mining complexity).

Features of the transaction

  1. Anonymity. The address that Bitcoin is sent to consists of 30 characters. You can track the flow of transactions, but the address is not always associated with a real person.
  2. Security. The balance of bitcoins is fixed in a cryptographic system with a public key. Only the owner of a private key can send cryptocurrency to other addresses.
  3. Unable to cancel. It is no longer possible to cancel the transaction after the transaction has been completed.
  4. Deregulation. Everyone can use cryptocurrency.
  5. Coverage and speed. Information about the transaction is transmitted incredibly quickly, and confirmation is received within a few minutes. No one knows the buyer’s physical location.

Where to buy Bitcoin?

There are Deposit systems that use crypto-exchanges. So, to buy Bitcoin, you will first need to top up your balance, buy the digital currency itself, and then withdraw it to your Bitcoin wallet, paying a Commission for withdrawing coins. The cheapest method of buying is buying on the stock exchange. The exchange rate is as close as possible to the market rate.

BTC rate

The current exchange rate of the coin is calculated based on the average price on the largest currency exchanges. For example, you can track the exchange rate on our Bitniex exchange. The Bitcoin exchange rate is constantly changing, during the day it can change by 10% in one direction or another.

The choice of crypto-currency wallet

A cryptocurrency wallet is a place where digital currency will be stored. The most secure method of storage is using paper or electronic wallets.

TOP secure cryptocurrency wallets

These wallets are one of the most secure crypto wallets in the world:
submitted by Bitniex to Bitniex [link] [comments]

Particl Marketplace: Where Sellers Meet Buyers

Particl Marketplace: Where Sellers Meet Buyers
People had been speculating since the dawn of crypto when the world’s largest online marketplaces, the ones of the Amazon caliber like eBay, Etsy or AliExpress, and, well, Amazon itself, would start to accept cryptocurrencies. There were a slew of rumors, opinions, and theories thickly interspersed with false reports popping up here and there of Amazon and its little cousins being on the verge of embracing cryptocurrencies. On top of that, someone has actually posted a petition on change.org to add Ether to Amazon as a payment method.
by StealthEX
Long story short, that was a waste of time. High hopes fell flat, and people lost religion. But not all. As the common wisdom goes, when hope dies, action begins. This exposition describes one such effort which tries to bring to fruition the idea of a decentralized marketplace for trading goods and services. And as you might have already figured it out, with a cryptocurrency as a means of payment. So let’s welcome Particl Marketplace and see what it has to offer – and what Amazon has missed.

What is it, in simple words?

Particl Marketplace is an online marketplace where you can trade goods and services. Not a big deal, you may think. However, what distinguishes it from places like Amazon as well as cryptocurrency-enabled marketplaces is the decentralized nature of purchases on Particl. You can think of it as a variety of a decentralized cryptocurrency exchange (aka DEX) where trades are being conducted on-chain. But in case of Particl, it is goods and services that are being traded, not fiat or crypto, with deals on-chain as well, fully encrypted and decentralized.
Particl is a global peer-to-peer privacy-centered marketplace that uses an automated two-party escrow system. It is crypto-agnostic and designed to work with any cryptocurrency, creating a secure, highly-scalable environment supported by a privacy-focused blockchain-based platform. The team behind the project sees its mission in developing “a new decentralized, private and democratic economy” that is governed by the network of its users, with no central authority or middleman getting in the way.
In the project developers’ own words, Particl enables everyone to participate in a free, anonymous exchange of all kinds of goods, without paying any fee and regardless of geographical location. To be sure, you are already thinking about Silk Road and its dark fate, and that the government is going to crack down monumentally on Particl one day. Well, the outcome may vary as the payments on the platform are made using its own cryptocurrency PART, with its laser focus on privacy and anonymity. But more on this later.

How did it grow up?

The development of the Particl project started in early 2017 with the release of the white paper describing the team’s vision for the marketplace, which was shortly followed by a successful seed funding that brought in enough funds ($750,000) to support the development of the project for a year (it turned out sufficient to last for over two years).
These donations helped to establish the Particl Foundation, a non-profit Swiss organization with the goal of providing legal protection for the project to ensure its sustained development and compliance with government regulations. It receives 10% of all the staking rewards generated on the Particl network, making the project self-sustainable and free for most uses.
Unlike other such projects in the crypto arena, Particl has been using its own blockchain from day one, which happened to be July 17, 2017. It was specifically designed to be crypto agnostic by supporting and working with any cryptocurrency. Additionally, it supported the smart contract tech out of the box, giving users an ability to build all kinds of decentralized applications (dApps) that can be directly integrated into the Particl marketplace.
On May 31, 2018, the Particl Marketplace, the Holy Grail of the entire endeavor, was made available for alpha testing on the testnet of the project, which later split into development and stable branches. It went live with the mainnet release of the Particl Open Marketplace on August 12, 2019, which featured Particl Desktop 2.0.0, a client-side application providing user interface and built-in wallet functions.
On November 25, 2019, the Particl Desktop 2.3.0 client was released that enabled Bitcoin payments and marked the introduction of untraceable transactions. With the help of the new in-wallet exchange module, everyone can easily swap their bitcoins for the native PART coin. Moreover, the module allows seamless integration of third-party accountless exchange services right into the marketplace, with StealthEX being one of them.

How is it different from other marketplaces?

The common solution many P2P marketplaces implement to protect buyers and sellers from the other party failing to honor their end of the bargain is through third-party escrow, where the “third-party” in the majority of places and cases is the platform itself that the market participants must mutually trust. In short, it is a single point of failure. And the selling (pardon the pun) point of the entire Particl’s marketplace is its decentralized escrow, which is a thing entirely between the two parties engaged. No middlemen allowed here!
And these are not empty words. Particl implements the concept best known as Mutually Assured Destruction (aptly shortened as MAD), a military doctrine you are certainly familiar with, and probably even afraid of, that consists in a mutual destruction of two belligerent parties in an all-out nuclear holocaust. If you are curious, the idea stems from the game theory and has a lot to do with the Nash Equilibrium, of John Nash’s fame. In a nutshell, Particl removes the need for a trusted escrow agent by introducing MAD escrow smart contracts.
A MAD escrow contract allows to lock funds in a multi-signature address that can be released only if all the parties sign off on the transaction. So both the seller and the buyer lock in the contract an agreed amount for a specified period of time, with the buyer also depositing the payment for the items purchased. The escrowed funds are released when both parties confirm the fulfillment of the agreement. Should one party break the terms, the funds remain locked for good causing a mutual financial loss until both parties agree to sign off.
Another crucial aspect of Particl Marketplace is its end-to-end privacy. The problem with conventional marketplaces acting as an escrow agent is that the communication between the parties should be open to the agent for it to serve as an arbitrator. With Particl, it is no longer required, and all messages between the buyer and the seller are encrypted. Despite being public, only their recipient can decrypt them, which effectively makes messages untraceable.
This is also where the PART coin turns up quite handy. It enables three different privacy modes, and with the most secure mode, the Anon mode, PART transactions utilize the RingCT privacy protocol, which hides both the amount transferred and the identity of the parties transacting. Accordingly, every part of the entire Particl trading environment is thoroughly decentralized, and the full anonymity of market participants is maintained at all times, making the platform a completely trustless marketplace. Big Brother is no longer watching you.
Aside from that, you can stake PART and generate a source of passive income for yourself. Particl uses a custom Proof-of-Stake consensus protocol, allowing you to get a piece of the pie in the form of new coins created at each block according to the scheduled inflation process. The annual inflation rate is initially set to 5% and goes down 1 percentage point every year until it finally floors at 2% indefinitely. Moreover, these rates are a bare minimum as they assume that all PART coins have been staked. Otherwise, the income will be bigger and better as the same rewards are paid to fewer coins.
Additionally, your passive income through staking PART will be augmented by the fees generated through the everyday marketplace operations. Whether it is network fees collected via PART transactions or marketplace listing fees paid by the sellers, all of them contribute to the stakers’ rewards. At the end of the day, staking PART can turn into a profitable business once the Particl platform starts to attract more traffic. In simple words, the more popular the market gets, the more fees it generates, the more coins the stakers earn.
As PART is a standalone cryptocurrency, it can be used outside Particl Marketplace as well. So if you plan on using it for purposes other than eCommerce, it is traded on several exchanges, for example, HitBTC and Bittrex, with more exchanges to list PART in the future. There are native Particl wallets available for storing PART such as Particl Qt with Ledger support, Particl-cli, and Particl Copay Wallet, with the latter available for both the desktop and the mobile. There is also a third-party multicurrency Flare Wallet, enabling cold staking for Particl.
Running Particl is a collective effort, which means no operational costs and no company bagging profits from it. The marketplace buyers don’t pay any commissions other than tiny network confirmation fees, while the sellers are only charged a small listing fee to keep spam listings to a minimum. This creates a highly competitive environment, with the sellers making more profits and the buyers having access to cheaper goods and services as a result.

What’s in the pipeline?

The next major release of the Particl Marketplace should have been Particl Desktop 2.4.0, but it was later rebranded as Particl Desktop 3.0 to reflect its breakthrough nature. It is set for release in the second half of 2020 and will enable the addition of user-created markets and storefronts, effectively turning the Particl marketplace into a network of specialized markets.
And if you think about it, that makes perfect sense. Say, you have a social network account highly merited and full of karma that you want to sell, whatever your reasons might be. Then creating a dedicated market for trading such accounts privately and securely may look extremely appealing to you. Whether it is the right thing to do is another matter, of course.
Kidding aside, it is obviously not about selling or offering something that the society on the whole doesn’t approve of or frowns upon. If you are a freelancer, for example, a graphics designer or a translator, you would be certainly interested in the future freelancer markets – along with your potential employers. Put simply, birds of a feather should flock together.
To keep things in perspective, popular freelancer markets that exist today charge up to 10-20% of what you would get from your client if you negotiated directly. All in all, establishing communities across the marketplace seems to be the next logical step in the natural evolution and growth of the platform. In fact, it is a little surprising that the Particl team didn’t come up with this idea earlier.
Meanwhile, we wish Particl success and good luck in achieving their goals and aspirations.
And remember if you need to exchange your coins StealthEX is here for you. We provide a selection of more than 250 coins and constantly updating the list so that our customers will find a suitable option. Our service does not require registration and allows you to remain anonymous. Why don’t you check it out? Just go to StealthEX and follow these easy steps:
✔ Choose the pair and the amount for your exchange. For example ETH to PART.
✔ Press the “Start exchange” button.
✔ Provide the recipient address to which the coins will be transferred.
✔ Move your cryptocurrency for the exchange.
✔ Receive your PART coins!
Follow us on Medium, Twitter, Facebook, and Reddit to get StealthEX.io updates and the latest news about the crypto world. For all requests message us via [email protected].
The views and opinions expressed here are solely those of the author. Every investment and trading move involves risk. You should conduct your own research when making a decision.
Original article was posted on https://stealthex.io/blog/2020/08/26/particl-marketplace-where-sellers-meet-buyers/
submitted by Stealthex_io to StealthEX [link] [comments]

Crypto Faucet I use to store my mined bitcoin on, with 4.08% APR paid daily with accounts over 30k satoshi. Referral link included, I share 50% commissions with my referrals paid every Sunday if you're interested.

My referral link for the aforementioned FREEBITCO.IN: https://freebitco.in/?r=30437643&tag=redditF
I have cross referenced this post on my site: passivecryptoguides.com
Why should you sign on with me? I'm not a one off, you can reach me personally through DM or post comments. I've done most of the leg work, alleviating the trial and error process. Just follow the steps in this guide specifically in sections 7️⃣, 8️⃣, and 9️⃣.
I share 50% commissions, get a kick back on everything you earn weekly.
I trust this site, and personally have 270$ worth of bitcoin in one account with almost 500$ total including two other accounts.
Coming from Cointiply? Well, as a heads up, you're not actually holding any BTC. I suggest what you earn you HODL in FREEBITCO.IN.
Just some abbreviation and terminology explanation before we start for those unfamiliar.
BTC=Bitcoin
USD=US Dollar
Satoshi
Click here Bitcoin price history, past and present
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
POST LAYOUT
1️⃣GENERAL INFO
2️⃣POST INTENTIONS
3️⃣MY EARNINGS
4️⃣HOW DO COMMISSION REWARDS WORK?
5️⃣SOME CLAIM STATS
6️⃣MULTIPLY BITCOIN STRATS AND INFO
7️⃣AUTOMATION
8️⃣OPTIMIZATION AND USE
9️⃣STRATS TO INCREASE EARNINGS
1️⃣0️⃣ADVERTISING YOUR LINK
1️⃣1️⃣LINKS
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣GENERAL INFO1️⃣
FREEBITCO.IN can be accessed from any device with internet.
Using a VPN or a TOR is now allowed given that your account achieves certain criteria similar to a captcha free account requirements.
🛑WARNING: FREEBITCO.IN wipes inactive accounts after a certain period! If you lose interest, withdraw your BTC!
📝NOTE: iOS devices (iPad, iPhone) are restrictive. The only way to access is via website, as BitBot isn't available.📝
FREEBITCO.IN is what's called a "faucet", a site that gives a small steady stream of crypto which FREEBITCO.IN does through hourly rolls and interest accrual.
FREEBITCO.IN also hosts other means to win or earn crypto, you can gamble with Multiplier, or bet on world evens and crypto prices.
After your account reaches 30k Satoshi, you begin to collect interest. The site also offers lifetime referral commissions, explained later in this guide.
All you need to start is an email. You can add more verification options for security later on. I would highly suggest it. Use a junk email though.
2FA and MFA are strongly suggested. A password should be 15 characters long. I suggest Google Authenticator for your 2FA needs.
I know you can definitely access this site from Brave Browser with add blockers enabled. I'm sure it will work with others. Even without an ad blockers, they only advertise their site gambling and games, no 3rd party adds that I've seen. It's not too invasive or spammy either.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
2️⃣POST INTENTIONS2️⃣
This post is both an advertising platform I use, and a guide I've made to help those interested to automate and optimize earnings.
For those of a cautious mindset, I've uploaded all of FREEBITCO.IN's information on interest accrual, security, and proof of mining on Imgur, in case you're worried about visiting the site.
Transparent link here: Interest accrual structure and FREEBITCO.IN security. https://imgur.com/a/wWjQtKT
My referral link: https://freebitco.in/?r=30437643&tag=redditC2
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
3️⃣MY EARNINGS3️⃣
So at this point, with hourly claims and daily interest, I'm bringing in roughly 8978 Satoshi (or .70$ USD with BTC at 7804$ USD) daily at full optimization on one account, and two other self referred accounts without lifting a finger. This is before the fact that a hourly roll (claim) can reward up to a max of 200$ USD worth of BTC (percentages in section 5️⃣).
They also have a weekly lotto (tickets awarded with every roll and referral roll) with the last 1st place winner receiving .32769156 BTC (2587$ USD at current bitcoin price).
This is also not including my current commissions on accounts not owned by me. In this post I will describe some of my strategies I've incorporated, and some insight into how this website works.
To offload or withdraw bitcoin, you're going to need what is called a "wallet". I personally use Coinbase (available on mobile or desktop) as you can sell it through here as well and easily move money to Paypal or a bank.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
4️⃣HOW DO COMMISSION REWARDS WORK?4️⃣
If you are already on FREEBITCO.IN, do you have someone who referred you? Do they share commissions? If not, why not make a new account and join me, where you'll get a return on everything you earn.
As you can see, large affiliate groups don't share anything, hoarding hundreds of thousands worth of BTC earned off their referrals
I share 50% of my commissions. I get 50% of your roll rewards, 25% of your interest, and 0.4% of your wagers. All of this is paid out by FREEBITCO.IN as a commission, so it's not pulled from your rewards or held BTC.
So the more you're active, the more you'll receive from me weekly (being active is doing anything that I get commissions from). IMPORTANT: Your (and all referrals) shares are based on activity, so if you are inactive for the week, you get a lower % for that week. If you're the most active of my referrals you get a higher percentage of what I share. This is to incentivize being active and to stop people from getting a cut without doing anything.
If you have FREEBITCO.IN automated, you don't have to worry about this. However, having a larger bankroll to earn interest, or playing Multiply BTC (I do not suggest playing unless doing so to meet auto roll requirements) will increase can your activity further.
Commission Structure
Here is some proof, I've actually shared about 2/3 of all commissions
Commissions update 12 January 2020
Here is a proof of Payment section per individual
📝NOTE: I've noticed when I was creating the images of commission sharing that the "RECENT" blocks are showing zero. If you look at totals from the first image, you can tell I'm actively sharing with all of my referrals.📝
Join my team FREEBITCO.IN
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
5️⃣SOME CLAIM STATS5️⃣
You can earn AT LEAST .00000552 BTC (.048$) daily when automated (or claiming every hour on the hour) before bonuses (like using reward points to increase rewards 1000%). After some testing, it seems that this amount will always be about .048$ worth of BTC, base claim rewards no bonus active.
After .00030000 BTC, you accrue compounding interest at a rate of 4.08% APR, paid daily. As soon as your daily interest is accredited, it too starts earning interest. The daily interest rate comes out to ~0.011% of your total held BTC.
FREEBITCO.IN gives you a roll once every hour, free
📝NOTE: Roll rewards fluctuate inversely with BTC price. BTC goes down, roll rewards go up, vice versa. The BTC rewards USD value will be extremely close to the values represented below.📝
Current rewards and probability with every hourly roll.
(.002$) -> 98.85%
(.02$) -> 1.00%
(.20$) -> .08%
(2.00$) -> .04%
(20$) -> .02%
(200$) -> .01%
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
6️⃣MULTIPLY BTC STRATS AND INFO6️⃣
🛑!WARNING!, NO STRATEGY IS 100%, THE MULTIPLIER GAME IS GAMBLING, YOU CAN STILL LOSE YOUR WHOLE BALANCE IF YOU PUSH YOUR LUCK.🛑
UPDATE: I decided to do some research after some odd outcomes when extensively testing some of my Multiplier strats. Turns out FREEBITCO.IN does indeed have a house advantage that isn't too transparent. Longer sessions are almost always going to come out negative. If you still plan on playing, do short sessions, once daily max, with lower amounts.
There are a couple methods to play the Multiplier with a reduced risk (but still a risk) here as well. I would suggest small play sessions.
STRAT #1
My preferred settings for AUTOROLL on MULTIPLY that I've had the best success rate with to date. (preferably with .00005000 in ACCT for best results)
BET: Minimum
ODDS: 3
ROLLS: (doesn't matter, 100)
BET ON: alternate
STOP BETTING PROFIT: .00000050, important as the bets will get exponentially higher with every loss. Win in small increments.
STOP BETTING LOSS: Set a loss limit if you want, I have mine set to .00001 and haven't reached it
ON WIN: select increase bet 0%
ON LOSS: select increase bet 65%
RANDOMIZE CLIENT SEED: yes
DO NOT REFRESH: yes
Here is a pic of the settings
Anything else doesn't matter. Make sure the boxes are checked for the above options.
With this strat, I've won positive on one account, about .000077 BTC, and I've only played 5 or 6 times, at less than 2-3 minutes of play time a session.
STRAT #2
Good for accounts with a low balance. I've had a surprising amount of luck with this method, enough so that I thought I'd post it here with an update. This could work well for accounts with less than 1k Satoshi, as a losing streak wouldn't be a huge loss. For this strat, you should have at least 189 Satoshi in your account.
BET: Minimum amount
ODDS/WIN CHANCE: 189 or %0.5
ROLLS: 189 (remains the same no matter if you bet more)
BET ON: High or Low, but not Alternate.
STOP BETTING ON PROFIT: Minimum amount, once again, you want continuous small wins
UPDATE: Conducting more tests for viability
I played these settings 10 times, I came out positive 8/10 times. In the end I was positive 433 Satoshi total with selecting "hi".
On selecting "low" I went positive 5/10 losing 525 Satoshi.
On selecting "hi" and betting 10 Satoshi, I went positive 3/10 times losing 9708 Satoshi.
On selecting "high" and betting 100 Satoshi, I never went positive, 0/10. Losing 189000 Satoshi (~15$ USD).
There does seem to be a pattern of losing more when betting more. Like anything gambling, there's probably a house advantage that's not too transparent.
Win small lose small.
Pic of these settings
STRAT #3
Another strategy I've tried is betting most of my balance once occasionally with a 94.06% chance of winning. This is, eh, alright to risk OCCASIONALLY, but a loss would set you back more than you ever made using this strategy, which happened to me, I lost about 40 USD worth of BTC after making maybe 5 USD.
THIS METHOD IS GREAT FOR MEETING NON-CAPTCHA ACCOUNT REQUIREMENTS!
Playing this in auto roll, out of 20 rolls I'd always lose at least once, putting me into the negative. Even with 10 rolls, I'd more often then not lose at least once.
Pic of these settings
There are other strats out there, such as the "Martingale", which is essentially doubling the bet amount every loss, then resetting your bet to minimum after a win to in theory "win back what you lost". At 47.5% odds of winning, I've had loss streaks that would drain my account.
My summary for Multiply, use sparingly. Don't use it as your primary means of earning. Use once or twice daily, limit play sessions to 5 minutes max.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
7️⃣AUTOMATION7️⃣
📝NOTE: FREEBITCO.IN captcha requirements seem to be tiered, with requirements for Captcha free upscaling when you BTC holding passes a certain threshold.
I'm currently testing, as is another team member (Shout out to u/SrExtreme69) , what exactly these thresholds, if holding at these thresholds increases the length of Captcha free rolls, and at what amount does FREEBITCO.IN no longer require these to be met.📝
📝NOTE: To start automating, remember to verify email and setup 2FA or the Captcha will still appear even if your account meets Captcha free requirements. Check the site occasionally as Captcha free roll requirements can change. After certain held BTC amount you don't need to renew your requirements. I haven't had to achieve new requirements in over a month.📝
📝NOTE: You may need to manually roll for a bit until the the ability to achieve a Captcha free account becomes available. It doesn't show at first.📝
📝NOTE: It's very difficult, if not impossible to automate on iOS devices.
First of all, getting to this point can be a grind, but once achieved you'll have a steady flow of BTC with options to increase earnings through rewards claims using RP. I would suggest going to your PROFILE tab on FREEBITCO.IN and disabling lottery to increase RP production when starting out. Using other apps or resources to supplement income is a good idea as well.
On the FREE BTC page, there is a blue text hyperlink with requirements that need to be met to make your account captcha free, thus allowing you to enable autoroll on extensions or apps. It has multiple ways to achieve this and they can change, so if your autoroll has stopped, check to see if these requirements have changed.
Here are the requirements. (Amounts vary)
It seems only two of these requirements need to be met.
The less risky and easiest method is to buy lottery tickets and bet with jackpots on. Even better is depositing bitcoin if you have that amount.
The POSSIBLY least expensive method is to bet both regularly and with Jackpots enabled on MULTIPLY (for higher amounts required, IMO Multiplier strat #3 works best)
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
8️⃣OPTIMIZATION AND USE OF FREEBITCO.IN8️⃣
For computers
I would suggest using Firefox, as you can add functions and tools to your bar up top. One of the being a "auto roll" for FREEBITCO.IN, still requires a "captcha free" account. Turn it on and let go, check it occasionally to make sure its still going.
Autoroll firefox add-on link
My link again for ease of access
Not my preferred method, but good for a second account, as using a computer means devoting more attention to FREEBITCO.IN in an inconvenient manner if you are just starting out. After Captcha has been removed, this becomes more hands free, but not as profitable as using bitbot, as you can't autoclaim RP rewards.
I haven't tried many methods besides using Firefox addons, as I'm wary of sources or intent when it comes to 3rd party scripts or programs. If I find any trustworthy scripts or programs, I will update here.
For Mobile
🛑BITBOT WARNING, IF YOU USE BITBOT TO ACCESS FREEBITCO.IN BEFORE USING MY REFERRAL, YOU WILL BE REFERRED THROUGH BITBOT, AND THEY DON'T SHARE COMMISSIONS AS FAR AS I CAN TELL🛑 My Link again
📝NOTE: iOS devices (iPhone, iPad) do not have access to BitBot, nor do they allow extensions/add-ons on their browsers. I have not personally found a way around this. You may still access the site and manually roll.📝
I use BitBot. This is the best place to start from IMO. You can set it to notify you of rolls and gives direct access to the site from the app (you can also access the site from any device with internet). Once your account is "captcha free" you can set it to auto roll AND automatically claim rewards every 24 hours (RP increase, BTC increase, Lottery ticket Increase).
📝NOTE: Bitbot allows auto roll from the app for accounts over 500 RP. This isn't permanent, as it uses your RP. You'll need to log onto the website through a browser to achieve captch free account requirements, which Bitbot does recognize, which allow completely free rolls.📝
📝NOTE: Accessing FREEBITCO.IN through BitBot doesn't allow access to the Hi-Lo or betting games.📝
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
9️⃣STRATS TO INCREASE EARNINGS9️⃣
Bitbot optimization
I started manual claims by setting roll notifications to "ON" for a while until I supplemented my BTC in FREEBITCO.IN with what I was collecting from my miner and CryptoTab. Once I was able to AUTOMATE and I had enough RP to claim the RP BONUS, I set it to do that automatically every 24 hours as this nets more RP than you spend (EG, 100 RP roll bonus costs 1200 RP, but can net 2400 RP if claimed every hour). Eventually you accrue enough RP to claim the %1000 BTC bonus, probably at a rate of once or twice a week.
My current BitBot settings now that its auto claiming, I have the 24 hour auto bonus claiming 100 RP roll bonus and 100% claim bonus, spending a total of 1520 RP, but I'm making 2400 RP with the RP bonus, leaving me 780 RP in the positive each day. Every now and then I'll stop the auto bonus claim so I can buy the 1000% claim bonus (3200 RP). So on a normal day I'll make about 1344 Satoshi. Bitbot auto bonus settings
Once your accrue more referrals, or save enough RP, it's possible to claim the 1000% BTC roll bonus multiple days in a row. This is just about as optimal as you can get for auto rolling.
Self Referrals
If you have two devices (phone and computer preferably) you can make two accounts as long as one uses a different wifi or internet connection, as the roll rewards tracks IP addresses for roll counts. So if you have 2 devices on the same network, it sudo links accounts, so if you roll on one, it restarts the timer on the other. This allows you to collect referral rewards from yourself. Effectively adding 25% of interest and 50% roll rewards.
I currently have a phone autorolling on BitBot with a computer autorolling on Firefox with a tool to roll automatically as long as the page remains open. My computer account is referred from my mobile account, and is currently bringing in an extra .000015+ BTC weekly (currently, total will be this Sunday and I will update).
I've also made another account on my partners phone, linked it with bitbot and got it auto-rolling. Once bitbot is going, its non-invasive and you can silence notifications, it also uses minimal data.
Supplementing with CryptoTab
I'll use CryptoTab on my computer 24/7 to earn BTC from that while I have FREEBITCO.IN running. I also have it running on my phone at night when I sleep and on an iPad I have that I don't use much, its server mining, so no worries about battery on mobile devices. On computers it does actually use your processing power. You can directly deposit into you FREEBITCO.IN accounts.
CryptoTab Link
I've used it for two weeks and have earned a total of .000454 BTC (3.60$ USD). Not huge, but enough to start collecting interest on FREEBITCO.IN and to get the capthca free account requirements.
Supplementing with Cointiply
🛑WARNING: Cointiply's main currency is the constant, weighted against the dollar (10,000 coin/1USD). This means your actually BTC holdings will fluctuate with BTC's price.
For this reason, it's my strong opinion that DON'T HODL in Cointiply as you're not holding actual BTC.🛑
Cointiply is a great site to earn decent amounts of COIN which translate to SAT's. Earn coin, withdraw to FREEBITCO.IN (as you actually hold BTC in cointiply).
I also use an ASIC miner (Antminer s9i, DIY liquid cooled and overclocked with BixBit firmware), and whatever I earn I'll put that into FREEBITCO.IN to collect interest. If you want, I may be willing to do a rental.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣0️⃣ADVERTISING YOUR LINK1️⃣0️⃣
📝NOTE: Since this faucet has been around a while, many people privy to sites such as this are already signed up. So getting referrals can be a slog. My tips for your ads is be genuine and don't hard sell or post "too good to be true" sensational ads.📝
COINTIPLY
This is another faucet. Its structure is a bit different from FREEBITCO.IN, as you complete offers to earn coin. Within this site (also an app) users can earn coins by doing PTC ads (and other offers), this is a good method to get exposure as you can advertise as well. Using this method my traffic for last week as about 800 people.
13000 coins buys about 1000 "clicks" on your ads. They also have options to advertise to people based on location (these options will increase or decrease cost). After your first ad, you usually get a 10% off coupon good for 7 days as well.
You can earn this amount within a day doing surveys on Theorem. I've done surveys before, and this has to be one of the best surveys sights I've ever done. Very rarely do I get kicked out mid survey, and if I do, I still get partial pay.
I will also use "Hideout" on my computer and leave it running. It has to be the open tab on your browser, with the browser open, not minimized. Let it go and check it occasionally as it has a timeout at roughly 2-3 hrs idle. As of now this is the best passive method of earning on Cointiply.
PI NETWORK
Pi Network, an ICO (Initial coin offering) based on trust and social media is another good medium for advertising. I will usually see 15-20 people click on my link with 2-4 ads posted per day.
Just go to "chat", select "random" and post an ad in the chat channel. No charge.
My tip, keep your ads short to medium in length, don't spam.
XYO NETWORK/COIN APP
This is another crypto earned through "geo-mining". On the "coin" app you can do a "geodrop" where you can leave a note. Just click on the box with a parachute icon, select "any" on the "Tile" selection. Leave your ad in the "note" section.
It costs 10 "COIN" at the very least to do a "geodrop". This method may not be worth it if you aren't already involved in the program. To earn a substantial amount of coin, you'll need a subscription or a "sentinel". Sentinels can actually be purchased for under 20$ nowadays (depending on site) and is the best option to earn. Without these you'll only make approx .05-.18 coin every 30 seconds if you're actively moving.
My tips if you plan on advertising on this platform, once again keep it short, and only advertise around 7-9am and 4-6pm, as this will be peak mining hours with people driving to and from work.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣1️⃣LINKS1️⃣1️⃣
My FREEBITCO.IN Referral Link
What is a Satoshi?
Bitcoins price through Coingecko
CryptoTab Link
Autoroll on Firefox
Coinbase Link
PI NETWORK
COINTIPLY
XYO NETWORK/COIN APP
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
submitted by thatoneguyYMK to SpareCash [link] [comments]

Running eclair with bitcoin-qt. (Ubuntu)

Trying to get eclair (lightning serveapp gui) to run and having issues. Seems I need to run qt in server mode so it can run the RPC server. Doing this in the command line however launches Bitcoin qt again and it attempts to reindex the whole blockchain (even though it's run from same location)... What am I doing wrong?
Interested also if anyone is running qt on Ubuntu and also attempting to experiment with lightning ...tips tricks etc..
submitted by hungdoge to Bitcoin [link] [comments]

Change block location Dogecoin Core

I'm using the Dogecoin Core because I'm a cool guy, but block data is 8GBs and my SSD is pretty small, is there anyway setting I can use to change the location from AppData?
submitted by lol_gog to dogecoin [link] [comments]

Wallet problems; technical wizards of r/bitcoin could you help me out please...

My wallet showed a message informing me I needed to install a newer version of the software. I installed version v0.6.2 Beta over the old version and it installed fine BUT, it still isn't catching up with the blockchain and now this message appears:
"WARNING: Displayed transactions may not be correct! You may need to upgrade or other nodes may need to upgrade."
I tried sending some bitcoin as a test and a red bar appeared across the transaction field and nothing moved: I'm bricking it. I am an avid bitcoin enthusiast but with less technical savvy than Amish Pete's donkey, Maurice.
Thanks in advance for your help
submitted by Bequizical to Bitcoin [link] [comments]

Proposed Statement Of Work (SOW) For PIVX Blockchain Wallet Tutorial Campaign

Date: February 11, 2019
Client’s Name: PIVX
Project Name: PIVX Blockchain Wallet Tutorial Campaign
Representatives For Each Cryptocurrency Project: PIVX Community
Representatives For www.Cryptocurrency.Market:
Denni Lovejoy, Software Tutorial Specialist
https://twitter.com/DenniLovejoy

I. Summary

Currently there are over 2,000 cryptocurrency projects listed on coinmarketcap.com. Many of these cryptocurrency projects have their own official “decentralized wallets”, use recommended third-party wallets or are in the process of developing their wallet software.
For example, the PIVX community created the PIVX QT Wallet.
Many newcomers entering the crypto market will not be computer or software savvy and will not properly set up, protect and secure their cryptocurrency wallets. Crypto projects such as PIVX will need Blockchain Tutorials for the PIVX Wallet to help new users understand how to use the wallet correctly.
The goal of this proposal is to obtain funding to create:
  1. Create a set of PIVX tutorials to help educate the public on how to use the the PIVX wallet and PIVX Central account in a step by step user friendly way. This set of tutorials will include:

II. Introduction

My name is Denni Lovejoy, I am a Blockchain Tutorial Specialist at www.Cryptocurrency.Market and you can view the quality of my past blockchain tutorials here:
Blockchain Tutorial Playlist
Blockchain Tutorial #41 - How To Setup A PIVX Wallet
I started creating blockchain tutorials to help newbies avoid getting hacked by bad actors in the crypto community. I chose to work with Tai Zen & Leon Fu Dot Com’s www.Cryptocurrency.Market channel because they were the 1st and only channel on the internet back in early 2013 that I found to be talking about trading and investing in bitcoin and cryptocurrencies. For example, they were the only channel that I know of to recommend investing in Bitcoin, Bitcoin Cash, Ethereum, Ethereum Classic, Stratis, Monero, Decred, NXT, Antshares, etc. when everyone else was afraid to do so. These coins all turned out to be huge winners.
I learned from the www.Cryptocurrency.Market channel that the #1 most important thing in cryptocurrencies is to survive. Unfortunately, many people who have bought cryptocurrencies lost them because of a lack of security, privacy and formal education on how to use their digital wallets correctly. The lack of blockchain tutorials amongst all cryptocurrencies is why I started my Blockchain Tutorial playlist on the Cryptocurrency Market channel. I believe uneducated newbies in the crypto community who do not understand what it takes to secure, protect and use their digital wallets will mistakenly leave their crypto on exchanges which is subject to being hacked or stolen and will not back up their private keys.
I have been monitoring the digital wallet space for quite some time now and I have chosen to associate my brand/ reputation & seek funding from the PIVX community for due to the project’s a) professionalism b) software engineering/technical abilities and most importantly c) a working privacy cryptocurrency and lastly d) the PIVX team has working decentralized wallets located on https://pivx.org/wallet/.
For the above reasons and the fact that I am more comfortable working with people I have personally met in person, I RESPECTFULLY submit this formal proposal to the PIVX community to request funding for myself to create an ambitious, 3rd party, independent, unbiased blockchain tutorials to educate the public on how to use the PIVX wallet and PIVX Central account correctly.

III. Objectives

To create a series of tutorial videos to:
  1. Educate the public on how to setup and use the PIVX wallet with a set of user friendly Blockchain Tutorials.
  2. Educate the public on how to set up a PIVX Central account and make a PIVX proposal.
  3. Educate the public on how to avoid common mistakes and pitfalls in key parts of the tutorials.

IV. “Blockchain Tutorial” Deliverables

TUTORIAL 1: How To Set Up & Use The PIVX QT Wallet ($500) [VIDEO FORMAT]
  1. In this phase, I will help viewers understand the initial process on how to download and install the PIVX QT wallet.
  2. Explain how to send and receive PIVX on the PIVX wallet.
  3. Explain how to backup, protect and update the PIVX wallet.
TUTORIAL 2: How to Set Up The Deterministic zPIV Wallet & Stake zPIV ($500) [VIDEO FORMAT]
  1. In this phase, I will demonstrate how to set up a zPIV wallet and stake zPIV.
TUTORIAL 3: How To Make A PIVX Central Account, Upvote/ Downvote, Comment & Make a PIVX Proposal ($500) [VIDEO FORMAT]
  1. In this phase, I will demonstrate how to make a PIVX Central account, show users how to upvote/ downvote and comment on the proposals.
  2. In this phase, I will provide the step by step details on how to make a PIVX Proposal.

V. Pricing & Terms

If you are interested in having me create the video tutorials mentioned in Section IV. “Blockchain Tutorial” Deliverables for your crypto project the cost will be as follows:
  1. I respectfully request $1,500 worth of PIVX for me to complete the section IV. “Blockchain Tutorial” Deliverables.
  2. The grand total cost of section IV. “Blockchain Tutorial” Deliverables = $1,550. (Includes Proposal Submission Fee)
  3. The estimated completion time for this entire proposal: 10 Hours x 4 Videos = 40 Hours x $37.5 USD/hour = $1,500 USD for Content Creation. This proposed schedule is to do this work in under 1 month allowing me to create 1 tutorial per week.
  4. Payment will be paid in PIVX (PIVX) by a PIVX Representative to me and will be processed after all 3 tutorials are accepted by the PIVX community. I will email a PIVX Representative an invoice with the details.
  5. I will include 1 revision per video.

VI. Conditions

  1. The tutorials will be hosted on the PIVX YouTube channel or any other official platform and not hosted anywhere else.
  2. I will get all my basic questions answered on PIVX support channels.
  3. I will state in the videos that I’m being sponsored by the PIVX Community anywhere that is deemed appropriate.
  4. PIVX will own the copyrights to the content created in this SOW and the PIVX Project has the right to use the content without asking me for permission.
  5. Videos will follow the PIVX design guidelines.
  6. Videos will be reviewed for accuracy by representatives of the PIVX community before being released to the public.
I am submitting this first draft of my proposed Statement Of Work (SOW) to invite feedback and commentary from the PIVX community.


The following are questions are for PIVX to consider and are not part of the SOW.

Statement Of Work (SOW) FAQ:
1. What is Denni Lovejoy’s big picture approach to help educate and promote PIVX to the public?
This entire SOW is based on the premise that PIVX is sponsoring me to do a series of educational/ tutorial style videos of the cryptocurrency governance coin sector.
2. Why are you taking a tutorial-based style approach to the videos?
The reason for this approach is to help viewers AVOID any mistakes they may make while going through ANY of the processes associated with using PIVX software.
3. Will you follow the PIVX design guidelines and have consistent screen-design intro/ outros?
Yes, I plan to use consistent screen-design and leverage anything additional the PIVX design and support team can offer me including intro, outros, disclaimers, ideas, etc. I will be following the guidelines found on https://github.com/PIVX-Project/Official-PIVX-Graphics.
4. Do you plan to publish the videos on the Youtube channel of your company or will they go into the official PIVX Youtube channel?
No, I do not plan to publish the videos on our 'Cryptocurrency Market' YouTube channel which has over 26,000 subscribers and over 700 videos. PIVX will have all the rights to the videos and will not be hosted elsewhere.
5. What is your target reach expectations and how do you want to keep the videos up-to-date if something changes in the GUI/software?
I do not plan on doing any advertising or marketing for the tutorials and will let the PIVX PR marketing team strategize that. I can speak with the PR team as needed, but my proposal is to create video content only suggested by the community.
I will give 1 revision per video if any of the videos need updating.
6. Did the other cryptocurrency projects you made video tutorials for also pay for their production?
No. My approach has been to create 66 blockchain tutorials for free first, to then leverage this work portfolio as my Proof-Of-Skill so that I can approach projects like PIVX with my proposal.
7. After watching your videos on youtube the production does not feel in step with our current educational videos: https://www.youtube.com/playlist?list=PLaMrpvQ0yJ_xFLGwNoDzfT6Wr0XHpyr1R
I can adapt to the current style of educational videos listed on the PIVX Class channel. The main differences I can adjust to are: a) include background music during the intro and outro b) use themed transitions and text pop ups. If this is what the community prefers, let me know. However, I can add one element to the tutorials for consideration. I can record my face while guiding viewers through the tutorial to offer a more human feel as if I'm holding your hand or you're looking over my shoulders in every step of the process.
Please let me know if you have any questions or suggestions about my proposal.
submitted by DenniLovejoy to pivx [link] [comments]

[ELI5] How to send coins using Coinb.in

How to send coins from ANY wallet using https://coinb.in/#settings

Why?

Because cold wallets, such as those stored offline in a text file as I keep recommending in my standard advice below:
All you need is a text file to put your wallets in, like this example from https://walletgenerator.net/?currency=Dogecoin
1,"D7WBUpdgLRtG6WyPsqjhaKiJR65X8ZGnkZ","6KieLMW1poAzNVnmLuQZqA262gxEQ51eLGdDK8e2GL2B4LHCKKb" 2,"DM8LT16d49zHr8ByXbUwZb9UBXDGMaZRdc","6Ktgxdv6vN9v2bDHwcJBBb3oMRAgXJumESzBnxaXUSGFZoq6pWQ" 3,"D5UCa51AfxjtVHQ46oYXe2YfkctTeLXPhx","6L2WSPWadRYCwt2L1CxH6zC7PoTYY3KyjxdiUoCqi5eyq6hQKvj"
Use https://coinb.in/#settings to move coins. Download both sites and run them offline. Use https://bitinfocharts.com/dogecoin/ to check balances and transactions. See http://www.mocacinno.com/blog/create-sign-broadcast-transactions-using-coinb/ for coinb.in tutorial. And read the ELI5s (and my history) for more info.
Are without doubt THE SAFEST way to store your coins. Plus, they consume no resources. No bandwidth, no network stress for every node we have, no storage of 20Gb+ blockchains, no weeks of waiting for things to sync, no tearing your hair out and posting desperate pleas for help, and most importantly, no coins irretrievably lost because you or your client screwed up.

What?

Wallets, ALL WALLETS are nothing but numbers. Very large numbers, but fundamentally no different from “7”, “42”, “911” or a phone number. They cannot be created nor destroyed, and you either know them or you don’t. Anyone who knows a key can use it to spend any coins it controls. Anyone who doesn’t know it, can’t. Don’t be the guy who doesn’t know his own keys. Keep them safe. Make copies. Keep those safe. Don’t let your friends, kid brother or random burglar find them, but don’t lose them either.
The only other thing you need for a fully functional wallet is a way to spend coins. Coinb.in is such a way. There are others, such as DogeCoinMultiSig.org which tomcarbon built.
Oh, and you can and should download it and run it locally.

Where?

The default entry point for coinb.in is https://coinb.in/#settings because this settings page is very well hidden. Its in the tiny gear wheel on the Broadcast page.
Looking across the top of the page, you can see
  • + New
  • Verify
  • Sign
  • Broadcast
  • Wallet
  • About
We’re only going to use three of these. New, Sign, Broadcast.
Now, keep in mind that coinb.in is an old Bitcoin tool which tomcarbon added Dogecoin to. Sometimes it thinks its dealing with Bitcoin still, so if you see anything odd, go and make sure you’ve selected Dogecoin in the Settings page.

When?

This tool should be the only place you spend coins. Sure, some clients may look more convenient, but they all suffer from a very big coin-losing flaw. Whenever you split a UTXO, they create a new wallet to send the change to. And they DON’T TELL YOU! This means unless you back up after every transaction, you run a high risk of finding all your coins have ‘disappeared’ from your wallet, and you don’t recognise where they went.
So if you use a client for the convenience as well as a text list of your wallets, you won’t know to add a new wallet to your masterfile. Its best to ditch the clients entirely.

How?

Now we come to the nitty-gritty. Lets use those three wallets above and assume that #1 is the source, #2 the destination and #3 the change wallet. Note that these won’t actually work, as none of them have ever been used, but they will do as examples.
New Transaction
Located at the bottom of the New menu, this will give you a page to enter your wallets and amounts.
In the top field, you enter your source address or Key. If you use the key, it will calculate the address when you click the Load button, which should match what you expected. Note that Load only brings in the first 100 UTXOs. This is so that you can retrieve coins from high-volume wallets which would kill any client. Coinb.in is in fact the ONLY WAY to do this, as even QT falls over around 600 UTXOs.
You will see the total balance that was loaded in the Transaction Fee field. And also in the Inputs tab, where you can go to adjust which UTXOs to spend.
Now you need to add the wallet(s) and amounts to send to them. Lets suppose the source contained a single UTXO for 1,000 Doge. You want to send 500 of them. So you would enter the #2 address in the Address field, and 500 in the Amount field. The Fee now changes to 500, which is not what you want.
So you click the + button to bring up a new line, enter the change address and the other 500, making the fee zero.
And you’re done. Check that the Fee is indeed zero. Check that the amounts shown in the Outputs and Inputs tabs match exactly.

THIS IS CRITICAL!

There is a bug which will send all the coins to the miners if the Outputs exceed the Inputs. I would have expected the Fee to show as negative in such a situation, but it doesn’t. BE WARNED!
Once everything looks right, hit the Submit button.
This will give you a block of hex code. Copy it.
Sign
Go to the Sign tab and paste it. Add your private key for the source wallet and click Submit. Note this can be done offline for safety.
This will give you another block of hex, the SIGNED transaction.
Broadcast
Copy this and paste it in the Broadcast tab and click Submit.
That’s it. Your coins are on their way. Make a cuppa and settle in while they arrive in a minute or three.
Note: All fields retain their values unless you refresh the page! This can be a boon when doing multiple transactions, such as when emptying a huge wallet. But it can also be a trap for the unsuspecting. Refresh or close the window when you’re done.

Who?

Who should use this?
Absolutely EVERYONE!
Even if you’re wedded to your client in some satanic blood-contract, you should still know how this works, because sooner or later you’re going to have a problem you can’t fix without it.
Definitely download the site and store it on every device you have. On every USB backup of your wallets. On your phone (well, except iOS which doesn’t do local HTML), etc, etc, etc.
Oh, and if you’re a programmer SmartyShibe, do consider improving the code over on GitHub.
EDIT: https://github.com/OutCast3k/coinbin added courtesy of AtomHearth
submitted by Fulvio55 to dogecoin [link] [comments]

[PSA] Dogecoin Wallet version 1.4 released. You must update.

WARNING: DO NOT send your wallet.dat file or dogecoin folder to anyone. There have been reports of people offering to help others by asking them to send their files to them so they can help. DO NOT do this. Scam attempt picture
Always encrypt your wallet! I can't express this enough. You should use a strong password longer than 15 characters. This password should contain numbers, symbols, and some capitalization! There is no need to have your wallet open 24 hours a day. Open it only when you need it. See - 'Getting Started' on the side bar.
This entire post has been written to be as close to ELI5 (Explain it like I'm 5) as possible - By request! If anyone wants to add/fix/correct anything in this message, please send a message to the mods <<-- Click blue text.
All blue text in this post can be clicked on. The blue text is a link to a picture, site or download file.
A very important message/reminder below.
25 Jan 1.5 pre-releases have started.
http://www.reddit.com/dogecoin/comments/1uhpwf/dogecoin_for_mac_14_topic_thread/
OLD VERSIONS The 1.4 update for the dogecoin wallet has been released. This update addresses the block chain error that occurred. This update is mandatory meaning you have to do this update. Also further down the page you can read up about the block chain. You MUST make sure you're on the correct block chain and the old block chain has been removed.
For a Windows computer the version must be 1.4. - 1.4.1 just released! See below
For a Apple Mac Computer the version must be 1.4
Download links:
[Windows Download Link](https://github.com/dogecoin/dogecoin/releases/download/1.4/dogecoin-qt-v14-Win.zip) <<--Click to start download
Windows Download Link 1.4.1 UPDATED 19JAN
Mac Download Link <<--Click to start download
Mac users can join this thread if there are any problems
Android (phone): Please see This post
To update, simply download the new version from the download link above. Open the downloaded file and extract the contents of the downloaded file into any new folder or location on your computer. If you put the files into a folder you can name the folder anything you want but make sure you remember that this is the latest version of the software.
You don't have to remove your folder containing the old version of the wallet. You can place it in a folder called 'Old versions of dogecoin wallet' if you like.
Now you can click on the Dogecoin icon contained in the new folder to open your version 1.4 wallet.
What happens if I get an error when I open the new wallet?
An error was reported called "11DbException"
If this happens Download this file and place it in the same folder as your updated wallet. Open the file you just downloaded called "Dogecoin OPEN' and wait. This might take 2 or 3 minutes.
Also jtlarousse has found a solution that worked on Windows. Please follow carefully and make backups before starting.
Reebzy might have found a solution for Apple Mac
Blockchain fork 101: The block chain is a ledger or document created containing every transaction that has ever happened. This file can be quite large. Bitcoins ledger is over 15GB. At some point this document/ledger split into two separate documents known as a fork.
How do I know if I am on the right block chain?
Go to your newly updated dogecoin wallet and open it. Click on Help>>Debug next Observe the current block number
*Note the example numbers in the pictures might be out of date by the time you read them
Now go over to http://dogechain.info/chain/Dogecoin . This website is the official Dogecoin blockchain website. Check the block number they're reporting
The number you found in your wallet and the number reported on the website should close. There might be a difference of 100 blocks depending on when you last refreshed your wallet or how long it took for you to get from one step to the next step in this guide and if the dogechain website is lagging.
I'M NOT ON THE CORRECT BLOCK CHAIN
My numbers are very different. How do I get back onto the right block chain?
IMPORTANT
For windows:
1)Close down the Dogecoin wallet client.
2)Go to your data folder: C:\Users[your windows log-in name]\AppData\Roaming\DogeCoin
3)Delete the Dogecoin.conf file. Do not delete the wallet.dat file!
4)Download this update file and place it into the Dogecoin folder where the other file was deleted.
For Apple Mac:
1)Close down the Dogecoin wallet client.
2)Go to your data folder: ~/Libarary/Application Support/Dogecoin
3)Delete the Dogecoin.conf file. Do not delete the wallet.dat file!
4)Download this update file and place it into the Dogecoin folder where the other file was deleted.
Next visit this post by Netcodepool for instructions on how to manually download the correct block chain and install it.
Much Thanks. 
Edit: Some posts were removed from this thread. To limit confusion.
Check this post for details about mining pools that were/are using the wrong fork.
Did you send coins only to find out you're on the wrong chain? See this post to get them back
An Apple Mac support thread has been made by voidref (The mac developer). If you're having troubles please see this thread
Some shibes have reported their wallets wont sync. Please check to make sure your firewall, antivirus, malware scanner or similar programs are not blocking it the wallet. You can add rules to these programs to allow the wallet to make contact with the internet. It's not advised but possible to also disable the software for a short amount of time. Don't forget to enable the software again afterwards.
Is your wallet crashing? Try this helpful tip from gandhikahn or if you're using windows try the 1.4.1 update above.
submitted by 42points to dogecoin [link] [comments]

Electrum 2.9.0 released

Release 2.9 - Independence (July 27th, 2017)

submitted by keystrike to Bitcoin [link] [comments]

Facebook’s Libra won’t be as power-hungry as Bitcoin

Libra, Facebook’s new cryptocurrency, is expected to have a smaller environmental footprint compared to some of its more notorious blockchain brethren, including bitcoin, according to experts. Its energy demands are projected to be more like those of existing data centers — which, while still demanding, aren’t quite as energy-hungry as mining bitcoins.
The currency hasn’t launched yet, so it’s hard to know how those claims will stack up against reality. But its design — more centralized than most cryptocurrencies — means that Libra will likely draw less energy. Unlike its more decentralized peers, only a few trusted members of the Libra Association, the centralized hub for the currency, can create Libra.
AN ORDER OF MAGNITUDE MORE EFFICIENT THAN BITCOIN
“This is an order of magnitude more efficient than bitcoin will ever be,” says Ulrich Gallersdörfer, a researcher at Technical University of Munich focused on blockchain research. Gallersdörfer was the co-author on a recent paper in Joule30255-7) finding that bitcoin operations emit more climate-warming gas than the country of Jordan.
Bitcoin uses so much energy because people who want to hold the cryptocurrency have to compete for it. That means bitcoin mining operations need huge amounts of computing power to snag a single coin, and to stay in the running, they all need to be running a set of complicated problems all at once. That uses a huge amount of energy every year — in 2018, researchers estimated that bitcoin used about as much energy as Ireland.
By contrast, Libra is designed so that an algorithm issues units of the cryptocurrency in proportion to the size of a company’s initial deposit into the system. That’s still a lot to keep track of, but it’s nowhere near as complicated as a mining operation. Instead, it’s more like… normal data centers. Now, data centers draw power, too. In fact, data centers accounted for 2 percent of the total US energy usage in 2014, a 2016 study published by the DOE found. And they’re also responsible for about as many carbon dioxide emissions as the airline industry. But despite those drawbacks, these specially designed warehouses of servers are the rocks on which tech giants like Facebook continue to build and expand their digital empire.
“Facebook or other companies will have to set up servers, will have to run the software, will have to validate transactions. But that’s not really anything different to running regular services for Facebook.com or for WhatsApp,” Gallersdörfer says.
A USEFUL WAY TO GENERALLY CONSIDER HOW TO MAKE DATA CENTERS LESS ENVIRONMENTALLY TERRIBLE
Facebook has made concerted efforts to make their centers more sustainable, but the energy demand prompted by Libra might be a useful way to generally consider how to make data centers less environmentally terrible. The easiest thing to do is make sure that the existing resources are used efficiently — so that might mean more efficient hardware. But it also means considering the vast amounts of water used to cool servers: in a lot of cases that fresh water flows through the system and gets discarded, a horrifying waste, especially in areas with water shortages.
One way to meet the challenge in a water-scarce world is to reuse water as often as possible, says Emilio Tenuta, vice president of sustainability at Ecolab. But water can’t be reused forever in cooling systems. As it gets heated and moves through the pipes, salts and other contaminants — think of scale from hard water forming in a bathroom — can build up in the machinery, making it less efficient. But by constantly monitoring and treating the water as it goes through a system, companies like Ecolab hope they can recirculate water through cooling systems as often as possible, reducing the amount of water used in data centers overall.
Making existing centers more efficient is great, but products on the scale of Libra could mean new data centers — and where they are matters. Companies could save themselves (and the world) a lot of environmental angst by simply looking for better locations to put data centers in the first place, Katrina Kelly-Pitou says.
THE AREA WHERE WE’RE FAILING, IN THE UNITED STATES, IS CLEANING OUR POWER SUPPLY
Kelly-Pitou, an urban systems strategist with architecture and engineering firm SmithGroup, says that companies should look for places with trained software engineers — to keep the servers running smoothly — and abundant, low-carbon power sources. By relying on a nearby hydroelectric dam, wind farm, or nuclear plant instead of coal or natural gas, data centers could dramatically cut their carbon footprint. That’s because ultimately, every data center relies on the energy grid. And that’s where many current data centers are falling short.
“The area where we’re failing, in the United States, is cleaning our power supply, and ensuring that we have clean energy to power the economic development that we want,” Kelly-Pitou says.
Libra hasn’t launched. We don’t know if it will take off. But for it to even get off the ground, it will need data centers — and developing greener data centers, and a lower-carbon energy grid to power them is something that could pay off no matter what.
submitted by VoltzUK to u/VoltzUK [link] [comments]

LND makes Bitcoin-QT crash

If I run BitcoinQT alongside LND, after 20-30 minutes BitcoinQT crashes
Specifically I noticed the drive where the blockchain is located gets disconnected (I suppose) and remounted as read-only
The system log shows "print_req_error: I/O error, dev sda sector XXXXXXXXX"
Around the same time on Bitcoin log I have this "34 of last 100 blocks have unexpected version”
I thought this was because of a faulty drive, but I get no error if I'm not using LND

What should I do? any advice?
submitted by RazerPSN to lightningnetwork [link] [comments]

Basic Bitcoin security guide

Hello,
This post is to give you a quick introduction into Bitcoin security. While nobody can guarantee you 100% security, I hope to mitigate some problems you can run into. This is the “20% of effort to get you to 80% safe”.
First of all, you have to determine how much money you want to hold in Bitcoin and how much effort are you willing to put in. If you are happy just holding a few dollars worth and don’t care if you lose them, that’s one approach to take. For everyone else, lets get started.
Password strength
A lot of the times how secure your money is will be determined by the strength of your password. Since in the worst case scenario we are talking about someone trying to brute force your wallet, casual online passwords are too weak. Under 10 characters is too weak. Common words and phrases are too weak. Adding one number to a password at the end is too weak.
Moreover, you can consider your password much weaker if you:
If you want a really strong password:
Wallet security
Now we are getting to the meat of things.
There are a number of wallets available to store your hard earned bitcoins. If you have a decent amount of coins to store, you should look into software wallets - BitcoinQT, MultiBit, Armory or Electrum. They are among the best place to store your money safely (provided your computer is secure as well). Chose one you think best suits you, install it and encrypt your wallet file with your strong password. You should take your wallet file and back it up (location of the file is different for different clients, so you have to do some research as to where to find that file). Back it up on a CD, safe USB drive or the like. Keep them safe. If you lose that file, you will lose your money.
A quick word on deterministic wallets. Electrum and Armory allow you to create wallets from a seed. If you use the same seed later, you can recreate your wallet on other machines. With deterministic wallets, you only need to keep that seed secure to have access to your money.
In comparison, in BitcoinQT's traditional wallet, every address you use is random, meaning that after you send 50-100 outgoing transactions your backups can be obsolete. Always keep an up-to-date backup of such wallet file if possible.
Okay, sometimes you need to have your Bitcoins with you when you leave your computer. In this case, you should look into either online or mobile wallets. A staple for both of those is Blockchain.info, but there are others to chose from.
A good rule of thumb with these is to not store more money in them than you can afford to lose. They are best used as a convenient way of accessing some money, not storing your savings. Online wallets are especially vulnerable to their servers getting hacked and people’s money getting stolen.
What to keep in mind while using online wallets:
  • Use a secure password (the more money you have in them the stronger the password should be)
  • Always keep a backup of your wallet in case you need to recover your money
  • Whenever possible, enable two factor authentication
  • Don’t use your online wallets from unsafe computers
Cold storage
Sometimes you want to store your bitcoins for a long time in a safe place. This is called “cold storage”. There are a few ways one can do this.
First of all, paper wallets. They are nice for giving people small bitcoin gifts, but also for long-term storage if properly used. What you want to do is generate and print them offline. You can save the linked page for example and run that offline. If you are really paranoid, you can put it on read-only media and access that from a different computer. For really long term storage, use archival-grade paper.
Another approach to take is using a separate computer for storing your money that is offline 99+% of the time. You could set one up easily by buying an old laptop, reformatting it, installing Linux and a Bitcoin client. Generate an address on that machine and send money to it from your main wallet. Depending on how paranoid you are you can connect that computer to the Internet afterwards to synchronize data with the Bitcoin Network and then turn it off and put it away somewhere safe until it’s needed.
Brain wallets
Don’t. They are not for you. Unless you are a security-conscientious programmer, those are not for you.
Diversifying
Keeping all of your eggs in one basket is never a good thing. You should look into diversifying some of your Bitcoin assets in case your other storage methods fail. Some ways you can diversify:
  • Buy a physical Bitcoin. As long as you trust the coin creator such coins can be an effective cold storage
  • Invest - I wouldn’t recommend this for more than some trivial amount unless you know what you are doing, but investing in some Bitcoin stocks could be a way to get more money out of your bitcoins
How not to diversify:
  • Avoid keeping your bitcoins at exchanges or other online sites that are not your online wallets. Such sites can be closed down or disappear along with your money.
  • Alt-coins - there are few cryptocurrencies that are worthwhile, but most of them are just Bitcoin clones. If a currency brings nothing new, it’s worthless in comparison to Bitcoin. Namecoin is a distributed domain name server (although recently it had a fatal flaw uncovered, so be warned), Ripple is a distributed currency exchange and payment system. Litecoin will only be useful in case Bitcoin’s hashing algorithm gets compromised (very unlikely at this time). Beyond that there are few if any alt-coins that are a worthwhile way of diversifying.
Accepting payments and safety
We’ve covered safe ways to store money, now a quick note about bitcoin payments and their safety.
First of all, when you are sending a transaction, pay your fees. Transactions without fees can take forever to propagate, confirm and clear. This can cause you a lot of stress, so pay your fees.
Secondly, when accepting large Bitcoin payments (say you want to suddenly cash in a gold bar into bitcoins), wait for at the very least 1 confirmation on those transactions. 6 is best, but having even 1 confirmations is a lot better than having none. This is mainly a rule of thumb for the paranoid (I wouldn’t be doing this for most casual transaction), but maybe it will save you if you are dealing with some shady people.
Wrapping up...
That should cover the basics. If you want to read more about Bitcoin’s security in general, here is my master thesis on the subject. A lot of questions about Bitcoin and security have also been answered on Bitcoin StackExchange - be sure to check it out.
Comments and improvement suggestions welcome.
EDITS:
  • Removed link to insecure site
  • Removed random article section
  • Added information about deterministic wallets
submitted by ThePiachu to Bitcoin [link] [comments]

Some additional ways to help Project Ravencoin and the Ravencoin network (from Bruce Fenton)

This was posted in the official Ravencoin Discord. Well worth repeating here!
Posted by Bruce fenton in the nest today
Some additional ways to help Project Ravencoin and the Ravencoin network.
This project belongs to you. There is no owner, there is no premine, no ICO, no special founders tokens sale or presale, there is no controller. It's yours...the early members of the community and others who join. We make from it what we put in.
The Inuit, Tlinglit, Tahitian, Chukchi, Sioux and the Haida among others call Raven the magical keeper of secrets, the trickster, friend of the First Men and Creator of the World. An idea or force able to shift, change and create something from nothing. In open source the power of the crowd can do amazing things. Look at what we have accomplished in less than 60 short days: a fairly issued, widely distributed coin with a very solid network and code bass.
This is your coin, whatever you put into it is what it becomes. This will be fun.
submitted by __pathfinder__ to Ravencoin [link] [comments]

Secure paper wallet tutorial

This is my handout for paranoid people who want a way to store bitcoin safely. It requires a little work, but this is the method I use because it should be resistant to risks associated with:
  1. Bad random number generators
  2. Malicious or flawed software
  3. Hacked computers
If you want a method that is less secure but easier, skip to the bottom of this post.
The Secure Method
  1. Download bitaddress.org. (Try going to the website and pressing "ctrl+s")
  2. Put the bitaddress.org file on a computer with an operating system that has not interacted with the internet much or at all. The computer should not be hooked up to the internet when you do this. You could put the bitaddress file on a USB stick, and then turn off your computer, unplug the internet, and boot it up using a boot-from-CD copy of linux (Ubuntu or Mint for example). This prevents any mal-ware you may have accumulated from running and capturing your keystrokes. I use an old android smart phone that I have done a factory reset on. It has no sim-card and does not have the password to my home wifi. Also the phone wifi is turned off. If you are using a fresh operating system, and do not have a connection to the internet, then your private key will probably not escape the computer.
  3. Roll a die 62 times and write down the sequence of numbers. This gives you 2160 possible outcomes, which is the maximum that Bitcoin supports.
  4. Run bitaddress.org from your offline computer. Input the sequence of numbers from the die rolls into the "Brain Wallet" tab. By providing your own source of randomness, you do not have to worry that the random number generator used by your computer is too weak. I'm looking at you, NSA ಠ_ಠ
  5. Brain Wallet tab creates a private key and address.
  6. Write down the address and private key by hand or print them on a dumb printer. (Dumb printer means not the one at your office with the hard drive. Maybe not the 4 in 1 printer that scans and faxes and makes waffles.) If you hand copy them you may want to hand copy more than one format. (WIF and HEX). If you are crazy and are storing your life savings in Bitcoin, and you hand copy the private key, do a double-check by typing the private key back into the tool on the "Wallet Details" tab and confirm that it recreates the same public address.
  7. Load your paper wallet by sending your bitcoin to the public address. You can do this as many times as you like.
  8. You can view the current balance of your paper wallet by typing the public address into the search box at blockchain.info
  9. If you are using an old cell phone or tablet do a factory reset when you are finished so that the memory of the private keys is destroyed. If you are using a computer with a boot-from-CD copy of linux, I think you can just power down the computer and the private keys will be gone. (Maybe someone can confirm for me that the private keys would not be able to be cached by bitaddress?)
  10. To spend your paper wallet, you will need to either create an offline transaction, or import the private key into a hot wallet. Creating an offline transaction is dangerous if you don't know what you are doing. Importing to a client side wallet like Bitcoin-Qt, Electrum, MultiBit or Armory is a good idea. You can also import to an online wallet such as Blockchain.info or Coinbase.
Trusting bitaddress.org
The only thing you need bitaddress.org to do is to honestly convert the brainwallet passphrase into the corresponding private key and address. You can verify that it is doing this honestly by running several test passphrases through the copy of bitaddress that you plan on using, and several other brainwallet generators. For example, you could use the online version of bitaddress, and brainwallet and safepaperwallet and bitcoinpaperwallet. If you are fancy with the linux command line, you can also try "echo -n my_die_rolls | sha256sum". The linux operating system should reply with the same private key that bitaddress makes. This protects you from a malicious paper wallet generator.
Trusting your copy of bitaddress.org
Bitaddress publishes the sha1 hash of the bitaddress.org website at this location:
https://www.bitaddress.org/pgpsignedmsg.txt
The message is signed by the creator, pointbiz. I found his PGP fingerprint here:
https://github.com/pointbiz/bitaddress.org/issues/18
"527B 5C82 B1F6 B2DB 72A0 ECBF 8749 7B91 6397 4F5A"
With this fingerprint, you can authenticate the signed message, which gives you the hash of the current bitaddress.org file. Then you can hash your copy of the file and authenticate the file.
I do not have a way to authenticate the fingerprint itself, sorry. According to the website I linked to, git has cryptographic traceability that would enable a person to do some research and authenticate the fingerprint. If you want to go that far, knock yourself out. I think that the techniques described in this document do not really rely on bitaddress being un-corrupt. Anyway, how do we know pointbiz is a good guy? ;-)
There are a lot of skilled eyes watching bitaddress.org and the signed sha1 hash. To gain the most benefit from all of those eyes, it's probably worthwhile to check your copy by hashing it and comparing to the published hash.
"But we aren't supposed to use brainwallets"
You are not supposed to use brainwallets that have predictable passphrases. People think they are pretty clever about how they pick their passphrases, but a lot of bitcoins have been stolen because people tend to come up with similar ideas. If you let dice generate the passphrase, then it is totally random, and you just need to make sure to roll enough times.
How to avoid spending your life rolling dice
When I first started doing this, I rolled a die 62 times for each private key. This is not necessary. You can simply roll the die 62 times and keep the sequence of 62 numbers as a "seed". The first paper address you create would use "my die rolls-1" as the passphrase, the second would be "my die rolls-2" and so on. This is safe because SHA256 prevents any computable relationship between the resulting private key family.
Of course this has a certain bad security scenario -- if anyone obtains the seed they can reconstruct all of your paper wallets. So this is not for everyone! On the other hand, it also means that if you happen to lose one of your paper wallets, you could reconstruct it so long as you still had the seed.
One way to reduce this risk is to add an easy to remember password like this: "my die rolls-password-1".
If you prefer, you can use a technique called diceware to convert your die rolls to words that still contain the same quantity of entropy, but which could be easier to work with. I don't use diceware because it's another piece of software that I have to trust, and I'm just copy/pasting my high entropy seed, so I don't care about how ugly it is.
Why not input the dice as a Base 6 private key on the Wallet Details tab?
Two reasons. First of all, this option requires that you roll the die 99 times, but you do not get meaningful additional protection by rolling more than 62 times. Why roll more times if you don't have to? Second, I use the "high entropy seed" method to generate multiple private keys from the same die rolls. Using the Base 6 option would require rolling 99 times for every private key.
I'm a big nerd with exotic dice. How many times to roll?
Put this formula in Excel to get the number of times to roll: "=160*LOG(2,f)" where f = number of faces on the die. For example, you would roll a d16 40 times. By the way, somewhat unbelievably casino dice are more fair than ordinary dice
The "Change address" problem:
You should understand change addresses because some people have accidentally lost money by not understanding it.
Imagine your paper wallet is a 10 dollar bill. You use it to buy a candy bar. To do this you give the cashier the entire 10 dollar bill. They keep 1 dollar and give you 9 dollars back as change.
With Bitcoin, you have to explicitly say that you want 9 dollars back, and you have to provide an address where it should go to. If you just hand over the 10 dollar bill, and don't say you want 9 dollars back, then the miner who processes the transaction gives 1 dollar to the store and keeps the remainder themselves.
Wallet software like Bitcoin-Qt handles this automatically for you. They automatically make "change addresses" and they automatically construct transactions that make the change go to the change address.
There are three ways I know of that the change problem can bite you:
  1. You generate a raw transaction by hand, and screw up. If you are generating a transaction "by hand" with a raw transaction editor, you need to be extra careful that your outputs add up to the same number as your inputs. Otherwise, the very lucky miner who puts your transaction in a block will keep the difference.
  2. You import a paper wallet into a wallet software and spend part of it, and then think that the change is in the paper wallet. The change is not in the paper wallet. It is in a change address that the wallet software generated. That means that if you lose your wallet.dat file you will lose all the change. The paper wallet is empty.
  3. You import a paper wallet into a wallet software and spend part of it, and then think that the change is in the change address that the wallet software generated. If the transaction did not need to consume all of the "outputs" used to fund the paper wallet, then there could be some unspent outputs still located at the address of the paper wallet. If you destroyed the paper wallet, and destroyed the copy of the private key imported to the wallet software, then you could not access this money. (E.g. if you restored the software wallet from its seed, thinking all of the money was moved to the wallet-generated change addresses.)
For more on this, see here
The hot paper wallet problem
Your bitcoin in your paper wallet are secure, so long as the piece of paper is secure, until you go to spend it. When you spend it, you put the private key onto a computer that is connected to the internet. At this point you must regard your paper wallet address as hot because the computer you used may have been compromised. It now provides much less protection against theft of your coins. If you need the level of protection that a cold paper wallet provides, you need to create a new one and send your coins to it.
Destroying your paper wallet address
Do not destroy the only copy of a private key without verifying that there is no money at that address. Your client may have sent change to your paper wallet address without you realizing it. Your client may have not consumed all of the unspent outputs available at the paper wallet address. You can go to blockchain.info and type the public address into the search window to see the current balance. I don't bother destroying my used/empty paper wallet addresses. I just file them away.
Encrypting your private key
BIP 0038 describes a standardized way to encrypt your paper wallet private key. A normal paper wallet is vulnerable because if anyone sees the private key they can take the coins. The BIP38 protocol is even resistant to brute force attacks because it uses a memory intensive encryption algorithm called scrypt. If you want to encrypt your wallets using BIP38, I recommend that you use bitcoinpaperwallet because they will let you type in your own private key and will encrypt it for you. As with bitaddress, for high security you should only use a local copy of this website on a computer that will never get connected to the internet.
Splitting your private key
Another option for protecting the private key is to convert it into multiple fragments that must be brought together. This method allows you to store pieces of your key with separate people in separate locations. It can be set up so that you can reconstitute the private key when you have any 2 out of the 3 fragments. This technique is called Shamir's Secret Sharing. I have not tried this technique, but you may find it valuable. You could try using this website http://passguardian.com/ which will help you split up a key. As before, you should do this on an offline computer. Keep in mind if you use this service that you are trusting it to work properly. It would be good to find other independently created tools that could be used to validate the operation of passguardian. Personally, I would be nervous destroying the only copy of a private key and relying entirely on the fragments generated by the website.
Looks like Bitaddress has an implementation of Shamir's Secret Sharing now under the "Split Wallet" tab. However it would appear that you cannot provide your own key for this, so you would have to trust bitaddress.
Durable Media
Pay attention to the media you use to record your paper wallet. Some kinds of ink fade, some kinds of paper disintegrate. Moisture and heat are your enemies.
In addition to keeping copies of my paper wallet addresses I did the following:
  1. Order a set of numeric metal stamps. ($10)
  2. Buy a square galvanized steel outlet cover from the hardware store ($1)
  3. Buy a sledgehammer from the hardware store
  4. Write the die rolls on the steel plate using a sharpie
  5. Use the hammer to stamp the metal. Do all the 1's, then all the 2's etc. Please use eye protection, as metal stamp may emit sparks or fly unexpectedly across the garage. :-)
  6. Use nail polish remover to erase the sharpie
Electrum
If you trust electrum you might try running it on an offline computer, and having it generate a series of private keys from a seed. I don't have experience with this software, but it sounds like there are some slick possibilities there that could save you time if you are working with a lot of addresses.
Message to the downvoters
I would appreciate it if you would comment, so that I can learn from your opinion. Thanks!
The Easy Method
This method is probably suitable for small quantities of bitcoin. I would not trust it for life-altering sums of money.
  1. Download the bitaddress.org website to your hard drive.
  2. Close your browser
  3. Disconnect from the internet
  4. Open the bitaddress.org website from your hard drive.
  5. Print a paper wallet on your printer
  6. Close your browser
submitted by moral_agent to BitcoinWallet [link] [comments]

[Guide] No hardware to mine? How to net 6,000+Ð/day using Windows Azure

Inspired by lleti 's free guide for using Amazon Web Services. However, from what I understand due to rental costs, it is more efficient to buy doge directly than use AWS. This guide is based on utilizing the $200 credit that comes with the Windows Azure cloud computing free trial, so you will not pay anything.
This is targeted at shibes with poor hardware that can only mine 50-200 doge per day, but it will work for everyone.
Disclaimer: Doge rate is an estimate based on current difficulties and market. Windows Azure trial may be US only (?)
Overview / How it works
You will not be mining doge directly with this method. Mining doge effeciently requires a GPU, which aren't found in traditional servers. Instead, we will be using the powerful CPUs provided with Windows Azure servers to mine a CPU based crypto-currency, such as QuarkCoin or SecureCoin, and convert those to doge.
Steps
1) Install your QRK or SRC wallet
Ideally if you are reading this, you have installed a dogecoin-qt wallet for yourself before. We will need to do the same for either QuarkCoin or SecureCoin. This is the wallet where will will send the coins you mine with your Windows Azure servers.
These are not the only CPU coin options, but QRK and SRC are very similar (same hash function) and simple to mine.
Once you have installed the wallet, it should look very similar to your DogeCoin wallet. If you have trouble downloading the blockchain ('out of sync'), look at these threads respectively to see which nodes you need to add to your config file. Config files are located at C:\Users\UserName\AppData\Roaming\CoinName.conf on Windows.
2) Set up a mining pool account
If you have joined a mining pool for DogeCoin, it will be a very similar experience for other alt coins. See the following bitcointalk threads which have a list of mining pools:
If you would like a pool recommendation, I can recommend src.coinmine.pl and qrk.coinmine.pl; this is from personal experience, I am not affiliated with them.
Once you are logged in you should also create 3 workers, as we will be setting up 3 servers, one for each server. So you should have 3 worker names, and a password set up for each worker.
3) Sign up for Windows Azure free trial
Link: www.windowsazure.com/en-us/pricing/free-trial/
You will have to provide a valid credit card and verify your account with a cell phone so they know you are a real person. This is a Microsoft product so they are reputable. Once you sign up, you will receive a $200 to use in 30 days. Remember to cancel when your credits are running out so they don't charge you.
4) Create Windows Server instances
I would recommend you watch this video which walks you through the UI of the Windows Azure management site to set up the virtual machines we need. Essentially we are going to do the following:
Thus we have a total of 20 CPU cores to mine QRK / SRC with. We want the the most CPU power we can get without excessively burning our $200 credit. That's why 2008 R2 is used, and only 3 instances of it.
5) Remotely connect to servers and download miner
This section is also covered in the video from section 4, watch it for a visual walkthrough.
Once the servers have been initialized on Microsoft's end, we should be able to access them under 'Virtual Machines' at www.manage.windowsazure.com. You should see each host name and a status, and when selected there should be an additional 'Connect' button - click it.
You should now be prompted to download a .rdp file. Download this for each of your 3 virtual machines to a folder you will remember. You will open this .rdp file and use the login credentials you previously specified to connect to each server.
Once you are remotely connected, you should see the desktop. Open up the first icon on the taskbar that looks like a server, this is your server manager. We need to open up the 'Configure IE ESC' setting that's visible on this pane. Make sure 'Off' is selected for both admins and users on the IE ESC configuration.
Now, open up the IE browser and navigate to https://docs.google.com/file/d/0B9cvOfoOekSdVzZZcThLZHg4bjA/edit. Press Ctrl + S to download the entire zip to the desktop, and un-zip it.
6) Configure and start miner
Again, this is pretty much covered in the video from section 4, if you prefer watching.
You should now have a folder on your server's desktop named quark-v2_w64. This is the miner for both QRK and SRC. We are going to be using minerd64_sse4.exe. Create a shortcut to minerd64_sse4.exe within the same folder. We now need to add the parameters for your miner.
Right click on your minerd64_sse4.exe shortcut -> Properties. Look at the target field, it should look like this:
C:\Users\UserName\Desktop\quark-v2_w64\minerd64_sse4.exe
We are going append the following format to this target field
-a quark -t 8 -o stratum+tcp://src.coinmine.pl:6020 -u user.worker -p password
-a: algorithm, both SRC and QRK use 'quark'
-t: number of cores (so either 8 or 4 for our purposes)
-o: mining pool information (url and port).
-u: account you have for your mining pool, then a period, then a worker name
-p: password that you created for the worker in step 2
So here is an example of what the target field of your shortcut should look like when you are done:
C:\Users\Nexic\Desktop\quark-v2_w64\minerd64_sse4.exe -a quark -t 8 -o stratum+tcp://src.coinmine.pl:6020 -u Nexic.worker1 -p pass1
7) Profit!!
If you set up your miners correctly on each Windows Server VM (I prefer to assign a separate worker to each one), you should be able to run them and see an output like this: http://i.imgur.com/3lECqSz.png. You can close your remote sessions without interrupting it.
How do you get the doge, you ask? Well, using the above setup I have earned 10 SecureCoins in the past 2 days. These are worth 0.00094 bitcoins (BTC) on Cryptsy at present. A doge is worth 0.0000007 BTC at present, so if I go from SRC -> BTC -> DOGE, I can turn 5 SRC to 6,642 DOGE on Cryptsy. There are also other exchanges, I won't go into how to exchange coins on this post. Remember, this is every day for about a week, for free!
Also, you can CPU mine on your own personal computers as well, not just the servers.
TL;DR
Mine QuarkCoin / SecureCoin using Windows Azure free trial, use Cryptsy (or other exchange) to convert to DOGE. Much more efficient than CPU mining Doge.
submitted by Nexic to dogecoin [link] [comments]

Is there anyway to force a refresh of one specific blknnnnn.dat file?

I have a corrupt blk00417.dat file and any read from it causes an issue.
Is there a way to force a reload of this file without having to download the whole blockchain again?
Thanks.
EDIT: I meant 'is there any way' not 'is there anyway' of course. Just thought I'd point out my own typo in case it was annoying anyone else ;-)
UPDATE: I'm currently running "C:\Program Files\Bitcoin\bitcoin-qt.exe" -checkblocks=0 -checklevel=0 to verify block locations in the block index. If that fails (I assume it will at the same place) I'll try a reindex and report back.
UPDATE 2: This has finished - 5 days later. -checkblocks=0 and -checklevel=0 didn't take that long. Reindex started off fairly quickly, verifying what as in my blknnnnn.dat file then when it got to the block before the one I had the error in it had to then download that and every subsequent block.
submitted by wintercooled to Bitcoin [link] [comments]

Possible BCH bug? - Call for attention

Hello All, I recently did a quick test using the bitcoin-qt ABC client to send 0.001BCH. The transaction has been confirmed and the number of confirmations is still going up at over 800 as we're speaking, per ABC client:
Status: 338 confirmations Date: 12/28/2017 04:41 To: 1Fb124oM5JFYjoYjfGnb7ipuHdqwKuMEYr Debit: -0.00100000 BCC Transaction fee: -0.00004520 BCC Net amount: -0.00104520 BCC Transaction ID: e4a299ae704f4b38ef4f4c3c33caaa29c46617487633b110a383719bbba86748 Transaction total size: 225 bytes Output index: 0
However, none of the BCC blockchain explorer seems to be able to locate the transaction. Please tell me that I'm over looking something really stupid, otherwise we may have a serious bug to deal with.
submitted by LarryL1 to Bitcoincash [link] [comments]

A guide to sign a super bitcoin (SBTC) transaction offline with patched Electrum for paranoid. Supports any wallets supported by Electrum (including segwit-p2sh and bech32 and all BIP39 seeds). Later BCD will be added.

This is quite advanced. This guide assumes you have some basic experience with the command line, can run Linux and you understand the basics of keys/signing/broadcasting transactions. And that you can compile and run Bitcoin Core and run Electrum. Also, some JSON experience is also nice.
Move you bitcoins to safe addresses first. It is best to use a new seed. Although the procedure in this guide is safe even for hot addresses (containing bitcoins), there is always a risk of a critical mistake. So play it safe.
Why such a guide? I followed these steps because I did not want to expose the keys to any online machine at all. Even if the keys do not have any bitcoins, you can some day have bitcoins sent to these addresses or you have a fork that you have not claimed. All can be stolen if you exposed your key.
This procedure should work with everything that Electrum supports (except maybe F2A that may be not supported on the SBTC chain), so Electrum seed legacy or segwit, LedgeTrezor with legacy or segiwt-p2sh (m/'49) derivation. Similarly, any BIP39 seeds or a single key. are also fine.
  1. Download Electrum. git clone https://github.com/spesmilo/electrum
  2. Apply my patch patch -P0 also this article. The guide assumes that you use patched Electrum from now on.
  3. Run the patched Electrum and catch up with your wallets you want to claim (the wallets can and rather should be watch only, or on ledgetrezor, otherwise your keys are exposed). Now go offline or set localhost as your server that Electrum connects to so no connection is performed. It's required so Electrum will not update the wallet after you edit it.
  4. You can manually create a transaction from the command line but you can use Electrum GUI. You need to locate the wallet file and remove all the transactions from the wallet file except for the one that funds the address you want to claim (the wallet obviously must not be encrypted but for watch-only this is OK). This is tricky. You need to make sure, you gave a proper JSON file, so all the final commas must be dropped. So "addr_history":, "transactions": , "tx_fees":, "txi", "txo", and "verified_tx3": should only contain the funding transaction(s), i.e. the one that you want to spend from.
  5. Run Electrum and check if the wallet is OK. Electrum will show an error if not. You will probably make a few errors so go back to editing the wallet.
  6. Download SBTC bitcoin core clone. git clone https://github.com/superbitcoin/SuperBitcoin
  7. Compile it and let it sync the blockchain (it will take a long time). Run it it with as large -dbcache= as you can. If you have a Bitcoin blockchain you can copy the blocks up to the fork date and issue sbtcd with -reindex. It will just reindex them and it will be faster.
  8. Generate a sbtc address with sbtc-cli getnewaddress. You can skip this step and send directly to an exchange but this intermediate step is safer.
  9. Create a transaction in Electrum to this address. Select all the bitcoins and use as small fee as possible (SBTC blocks are empty so any fee above 1 SBTCsat/byte should be OK).
  10. Save the transaction to a pendrive
  11. Download and install Kubuntu 16.04 (Kubuntu has all the QT libraries for Electrum) on a pen drive.
  12. Copy patched Electrum and the save the transaction to a pen drive (separate from Kubuntu will be more convenient).
  13. Run Kubuntu from the USB without any network access. Run Electrum from the pendrive. Create a wallet from the seed or private keys. The wallets are stored in RAM so after you reboot the computer, they will be gone. Load the transaction, sign it and save it to the pen drive.
  14. Go back to the SBTC Core on the online machine. Display the raw transaction (starts with the hex=). Check in the SBTC Core if it is correct sbtc-cli decoderawtransaction hex
  15. If it looks fine (and your blockchain got synced), broadcast it sbtc-cli sendrawtransaction hex
If there is no error, congratulations, you sent the transaction to the specified address. If it is to your SBTC Core wallet, wait until it confirms and send it further with sbtc-cli setfee feeperkb sbtc-cli sendtoaddress "addr" value "" "" true true
I'm going to update this guide when I figure out the BCD transactions intrinsics. You can download and run the BitcoinDiamond Core clone in the meantime.
SBTC tips: 1KjuY8CTrwMhdLt3uF3hCcSgfkHMyo1ELf
submitted by PVmining to BitcoinAirdrops [link] [comments]

Transcript from Ravencoin Open Developer Meeting - Nov. 16, 2018

Tron at 2:03 PM

Topics: Messaging (next phase) UI 2.2 - Build from develop - still working out a few kinks Mobile - Send/Rcv/View Assets - In progress Raven Dev Kit -Status

RavencoinDev at 2:04 PM

Hey Everybody! Let's get started!Thanks Tron for posting the topics.Tron is going talk about Messaging Plans.Let's start there.

Chatturga at 2:06 PM

It looks like this channel is not connected to the IRC. One moment

RavencoinDev at 2:07 PM

Well, we going to move forward as the tech guys fix the IRC connections.

Tron at 2:07 PM

I wanted to have a doc describing the messaging, but it isn't quite ready.I understand this isn't going to IRC yet, but I'm starting anyway.

RavencoinDev at 2:08 PM

Look for it soon on a Medium near you.

Tron at 2:08 PM

Summary version: Every transaction can have an IPFS hash attached.

Vincent at 2:09 PM

any plans for a 'create IPFS' button?

RavencoinDev at 2:09 PM

Yes

Vincent at 2:09 PM

on asset creatin window also?

RavencoinDev at 2:09 PM

Yes

Vincent at 2:09 PM

sweet

Tron at 2:09 PM

IPFS attachments for transactions that send ownership token or channel token back to the same address will be considered broadcast messages for that token.The client will show the message.Some anti-spam measures will be introduced.If a token is in a new address, then messages will be on by default.The second token in an address, the channel will be available, but muted by default.

RavencoinDev at 2:11 PM

That way I can't spam out 21b tokens and then start sending messages to everybody.

Tron at 2:11 PM

We'd like to have messaging in a reference client on all six platforms.

corby at 2:11 PM

Hi!

Tron at 2:11 PM

Photos will not be shown. Messages will be "linkified"

RavencoinDev at 2:12 PM

and plain text.We'll start with the QT wallet support

Tron at 2:12 PM

Any other client is free to show any IPFS message they choose.The messaging is fully transparent.

Rikki RATTOE at 2:13 PM

ok, so messaging isn't private

Tron at 2:13 PM

Anyone could read the chain and see the messages.

RavencoinDev at 2:13 PM

No, never was planned to be private

MSFTserver-mine more @ MinerMore at 2:13 PM

irc link should be fixed

Tron at 2:13 PM

It is possible to put encrypted content in the IPFS, but then you'd have to distribute the key somehow.

RavencoinDev at 2:13 PM

Thanks MSFT!

Chatturga at 2:13 PM

Negative

Tron at 2:14 PM

Core protocol changes Extend the OP_RVN_ASSET to include for any transfer: RVNT <0xHH><0x12><0x20><32 bytes encoding 256 bit IPFS hash> 0xHH - File type 0x00 - NO data, 0x01 - IPFS hash, 0x02 through 0xFF RESERVED 0x12 - IPFS Spec - Using SHA256 hash 0x20 - IPFS Spec - 0x20 in hex specifying a 32 byte hash. …. (32 byte hash in binary)

corby at 2:14 PM

By it's nature nothing on chain is private per se. Just like with wallets you'd need to use crypto to secure messaging between parties.

Tron at 2:14 PM

Advantages: This messaging protocol has the advantage of not filling up the blockchain. The message information is public so IPFS works as a great distributed store. If the messages are important enough, then the message sender can run nodes that "PIN" the message to keep a more durable version. The message system cannot be spoofed because any change in the message will result in a different hash, and therefore the message location will be different. Only the unique token holder can sign the transaction that adds the message. This prevents spam. Message clients (wallets), can opt-in or opt-out of messages by channel. Meta-message websites can allow viewing of all messages, or all messages for a token. A simple single channel system is supported by the protocol, but a channel could be sub-divided by a client to have as many sub-channels as desired. There are no limits on the number of channels per token, but each channel requires the 5 RVN fee to create the channel.

RavencoinDev at 2:14 PM

So, somebody could create their own client and encrypt the data on the blockchain if they wished.

corby at 2:15 PM

Wow Tron types fast

Rikki RATTOE at 2:15 PM

yeah there was some confusion in the community whether messaging would be private and off chain

Tron at 2:15 PM

Anti-Spam Strategy One difficulty we have is that tokens can be sent to any Ravencoin asset holder unsolicited. This happens on other asset platforms like Counterparty. In many cases, this is good, and is a way for asset issuers to get their token known. It is essentially an airdrop. However, combined with the messaging capabilities of Ravencoin, this can, and likely will become a spam strategy. Someone who wants to send messages (probably scams) to Ravencoin asset holders, which they know are crypto-savvy people, will create a token with billions of units, send it to every address, and then message with the talking stick for that token. Unless we preemptively address this problem, Ravencoin messaging will become a useless spam channel. Anyone can stop the messages for an asset by burning the asset, or by turning off the channel. A simple solution is to automatically mute the channel (by default) for the 2nd asset sent to an address. The reason this works is because the assets that you acquire through your actions will be to a newly generated address. The normal workflow would be to purchase an asset on an exchange, or through a ICO/STO sale. For an exchange, you'll provide a withdrawal address, and best practice says you request a new address from the client with File->'Receiving addresses…'->New. To provide an address to the ICO/STO issuer, you would do the same. It is only the case where someone is sending assets unsolicited to you where an address would be re-used for asset tokens. This is not 100% the case, and there may be rare edge-cases, but would allow us to set the channels to listen or silent by default. Assets sent to addresses that were already 'on-chain' can be quarantined. The user can burn them or take them out of quarantine.

RavencoinDev at 2:18 PM

Okay, let me know when/if you guys read through all that. 📷📷2

corby at 2:18 PM

To be clear this is a client-side issue -- anyone will be able to send anything (including messages) to any address on chain..

RavencoinDev at 2:18 PM

It'll be in the Medium post later.

Tron at 2:19 PM

@corby The reference client will only show messages signed by the issuer or designated channels.Who is ready for another wall of text? 📷

corby at 2:19 PM

I hear that's the plan 📷 just pointing out that it is on the client in these cases..

Tron at 2:20 PM

Yes, any client can show anything gleaned from the chain.Goal: A simple message format without photos. URL links are allowed and most clients will automatically "linkify" the message for valid URLs. For display, message file must be a valid json file. { "subject":"This is the optional subject", "message": "This is required.", "expires": 1578034800 } Only "message" is required {"message":"Hello world"}

bhorn at 2:21 PM

expires?

Vincent at 2:21 PM

discount coupon?

Tron at 2:21 PM

If you have a message that worthless (say after a vote), just don't show the message.

bhorn at 2:21 PM

i see - more client side operation

corby at 2:21 PM

/expires

Tron at 2:22 PM

Yep. And the expiration could be used by IPFS pinners to stop worrying about the message. Optional

RavencoinDev at 2:22 PM

If the client sees a message that is expired it just won't display it.

Vincent at 2:23 PM

will that me messaged otherwise may cause confusion?"expired'

RavencoinDev at 2:23 PM

YesWe'll do our best to make it intuitive.

Tron at 2:24 PM

Client handling of messages Pop-up messages or notifications when running live. Show messages for any assets sent to a new address - by default Mute messages for assets sent to an address that was already on-network. Have a setting to not show messages older than X IPFSHash (or 8 bytes of it) =

Rikki RATTOE at 2:25 PM

will there be a file size limit for IPFS creation in the wallet?

RavencoinDev at 2:25 PM

We'll also provide updated documentation.

Tron at 2:26 PM

Excellent question Rikki. Here are some guidelinesGuidelines: Clients are free to show or not show poorly formed messages. Reference clients will limit message display to properly formed messages. If subject is missing, the first line of the message will be used (up to 80 chars). Standard JSON encoding for newlines, tabs, etc. https://www.freeformatter.com/json-escape.html Expiration is optional, but desired. Will stop showing the message after X date, where X is specified as Unix Epoch. Good for invites, voting requests, and other time sensitive messages that have no value after a specific date. By default clients will not show a message after X blocks (default 1 year) Amount of subject shown will be client dependent - Reference client may cut off at 80 chars. Messages longer than 15,000 (about 8 pages) will not be pinned to IPFS by some scanners. Messages longer than 15,000 characters may be rejected altogether by the client. Images will not be shown in reference clients. Other clients may show any IPFS content at their discretion. IPFSHash is only a "published" message if the Admin/Owner or Channel token is sent from/to the same address. This allows for standard transfers with metadata that don't "publish".Free Online JSON Escape / Unescape Tool - FreeFormatter.comA free online tool to escape or unescape JSON strings

RavencoinDev at 2:26 PM

We're hoping to add preferences that will allow the user to customize their messaging experience.

Tron at 2:27 PM

Also, happy to receive feedback from everyone.

corby at 2:27 PM

In theory though if you maintain your own IPFS nodes you should be able to reference files of whatever size right?

Steelers at 2:27 PM

How about a simple Stop light approach - Green (ball) New Message, Yellow (Ball) Expiring Messages, Red (Ball) Expired Messages

RavencoinDev at 2:27 PM

Yes please! That's the point of sharing it here

Chatturga at 2:27 PM

Fixt

push | ravenland.org at 2:28 PM

Thanks @Tron can you provide any details of the coming 'tooling' at the end of november, and what that might enable (apologies as I am a bit late to meeting if this has been asked already)

VeronicaBOT at 2:28 PM

sup guys

Tron at 2:28 PM

Sure, that's coming.

RavencoinDev at 2:28 PM

That's the Raven WebDev Kit topic coming up in a few mins.

push | ravenland.org at 2:29 PM

oki 📷 cheers

RavencoinDev at 2:29 PM

Questions on messaging?

Jeroz at 2:30 PM

Not sure if I missed it, but how fast could you send multiple messages in succession?

BruceFenton at 2:30 PM

Some kind of sweep feature or block feature for both tokens and messages could be useful Certain messages will be illegal to possess in certain jurisdictions If someone sends a picture of Tiennneman tank man in China or a message calling for the overthrow of a ruler it could be illegal for someone to have There’s no way for that jurisdiction to censor the chain So some users might want the option to purge messages or not receive them client side / on the wallet

Tron at 2:30 PM

Messages are a transaction.

RavencoinDev at 2:30 PM

So it'll cost you to spam messages.They can only send a hash to that picture and the client won't display anything not JSON

corby at 2:31 PM

purge/block is the age old email spam

Tron at 2:31 PM

The Reference client - other clients / web sites, etc can show anything they wish.

RavencoinDev at 2:31 PM

You can also burn a token if you never want to receive messages from that token owner.

UserJonPizza|MinePool.com|Mom at 2:32 PM

Can't they just resend the token?

Tron at 2:33 PM

Yes, but it would default to mute.📷2

RavencoinDev at 2:33 PM

meaning it would show up in a spam foldetab

bhorn at 2:33 PM

is muting available for the initial asset as well?

RavencoinDev at 2:33 PM

Something easy to ignore if muted.

Tron at 2:33 PM

@bhorn Yes

BruceFenton at 2:33 PM

Can users nite some assets and not others?

Tron at 2:33 PM

@bhorn It just isn't the default.

BruceFenton at 2:33 PM

Mute

RavencoinDev at 2:33 PM

YesYou can mute per token.

BruceFenton at 2:34 PM

Great

Tron at 2:34 PM

And per token per channel.

Jeroz at 2:34 PM

channels are the subtokens?

BruceFenton at 2:34 PM

What’s per token per channel mean ?

Tron at 2:34 PM

The issuer sends to the "Primary" channel.Token owner can create channels like "Alert", "Emergency", etc.These "talking sticks" are similar to unique assets.📷1ASSET~Channel

RavencoinDev at 2:37 PM

Okay, we have a few more topics to cover today.Tron will post more details on Medium and we can continue discussions there.

Jeroz at 2:38 PM

Ah, I missed channel creation bit for each token with the 5 RVN / channel cost. It makes more sense to me now.

RavencoinDev at 2:38 PM

The developers are working towards posting a new version 2.2 that has the updated UI shown on twitter.

Vincent at 2:39 PM

twit link?

RavencoinDev at 2:39 PM

The consuming of large birds (not ravens) might slow the release a bit.So likely the week after Thanksgiving.

[Dev] Blondfrogs at 2:39 PM

The new UI will contain: - New menu layout - New icons - Dark mode - Added RVN colors

Dan1666 at 2:39 PM

+1 Dark mode

RavencoinDev at 2:39 PM

DARK MODE!

Dan1666 at 2:40 PM

so pleased about that

RavencoinDev at 2:40 PM

I can honestly say it'll be the nicest crypto wallet out there.

[Dev] Blondfrogs at 2:40 PM

A little sneak peak, but this is not the final project📷📷6📷3

!S1LVA | MINEPOOL at 2:40 PM

Outstanding

Dan1666 at 2:41 PM

reminds me of Sub7 ui for those that might remember

UserJonPizza|MinePool.com|Mom at 2:41 PM

Can we have an asset count at the top?

[Dev] Blondfrogs at 2:41 PM

Icons will be changing

Vincent at 2:41 PM

does the 'transfer assets' have a this for that component?

Tron at 2:41 PM

Build from develop to see the sneak preview in action.There may be small glitches depending on OS. These are being worked on.

Rikki RATTOE at 2:41 PM

No plans for the mobile wallet to show an IPFS image I'm assuming? Would be a nice feature if say a retail store could send a QR coupon code to their token holders and they could scan the coupon using their wallet in store

[Dev] Blondfrogs at 2:42 PM

@Vincent That will probably be a different section added later📷1

RavencoinDev at 2:42 PM

Yes, Rikki we do want to support messaging.Looking into how that would work with Apple and Google push.

push | ravenland.org at 2:42 PM

sub7📷1hahaoldschoolit so is similar aswell

[Master] Roshii at 2:43 PM

Messages are transactions no need for any push

Tron at 2:43 PM

@Rikki RATTOE There's a danger in showing graphics where anyone can post anything without accountability for their actions. A client that only shows tokens for a specific asset could do this📷1

RavencoinDev at 2:43 PM

True, unless you want to see the messages even if you haven't opened your wallet in a week.

Rikki RATTOE at 2:44 PM

the only thing I was thinking was if you simply linked the image, somebody could just copy the link and text it off to everyone and the coupon isn't all that exclusive

UserJonPizza|MinePool.com|Mom at 2:44 PM

Maybe a mobile link-up for a easy way to see messages by just importing pubkey(edited)

RavencoinDev at 2:45 PM

Speaking of mobileWe are also getting close to a release of mobile that includes the ability to show assets held, and transfer them.Roshii has been hard at work.📷6📷1

Vincent at 2:46 PM

can be hidden also?

RavencoinDev at 2:47 PM

We're still finalizing the UI design but that is on the list of todos📷1

Under at 2:47 PM

Could we do zerofee mempool messaging that basically gets destroyed after it expires out of the mempool for real-time stealth mode messaging

corby at 2:48 PM

That's interesting!

RavencoinDev at 2:49 PM

There are other solutions available for stealth messaging, that's not what the devs had intended to build. It does sound cool though @Under

Under at 2:50 PM

📷 we’ll keep up the good work. Looking forward to the db upgrades. Will test this weekend

RavencoinDev at 2:50 PM

Thanks!That leaves us with 10 minutes for the Dev Kit!Corby has been working on expanding some of the awesome work that @Under has been doing.

corby at 2:52 PM

Yes -- all of the -addressindex rpc calls are being updated to work with assets

RavencoinDev at 2:52 PM

Hopefully we'll be able to post the source soon once the initial use cases are all working.

corby at 2:52 PM

so assets are being tied into transaction history, utxos, etc

RavencoinDev at 2:52 PM

The devs want to provide a set of API's that make it easy for web developers to build solutions on top of Ravencoin.VinX is investigating the possibility of using Ravencoin to power their solution.

corby at 2:53 PM

will be exposed via insight-api which we've forked from @Under

[Master] Roshii at 2:53 PM

Something worth bringing up is that you will be able to get specific asset daba from full nodes with specific message protocols.

corby at 2:54 PM

also working on js lib for client side construction of asset transactions

Tron at 2:55 PM

Dev Kit will be an ongoing project so others can contribute and extend the APIs and capabilities of the 2nd layer.📷3📷3

RavencoinDev at 2:55 PM

Will be posted soon to the RavenProject GitHub.

corby at 2:55 PM

separate thing but yes Roshii that is worth mentioning -- network layer for getting asset data

RavencoinDev at 2:55 PM

Again want to give thanks to @Under for getting a great start on the project

push | ravenland.org at 2:56 PM

Yes looking forward to seeing more on the extensive api and capabilities, is there a wiki on this anywhere tron?(as to prevent other people replicating eachothers work?)

RavencoinDev at 2:56 PM

The wiki will be in the project on GitHub

push | ravenland.org at 2:56 PM

im guessing when the kit is released, something will appear, okok cool

RavencoinDevat 2:57 PM

Any questions about the Web DevKit?

push | ravenland.orgToday at 2:57 PM

well, what kind of support will it give us, that would be nice, is this written anywhereI'm still relatively new to blockchain<2 yearsso need some hand holding i suppose 📷

bhorn at 2:58 PM

right, what are initial use cases of the devkit?

push | ravenland.org at 2:58 PM

i mean im guessing metamask like capabilitysome kind of smart contract, some automation capabilitiesrpc scriptsstuff like thiseven if proof of concept or examplei guess im wondering if my hopes are realistic 📷

RavencoinDev at 2:59 PM

You can see the awesome work that @Under has already don that we are building on top of.

push | ravenland.org at 2:59 PM

yes @Under is truly a herooki, cool

RavencoinDev at 2:59 PM

https://ravencoin.network/Ravencoin Block ExplorerRavencoin Insight. View detailed information on all ravencoin transactions and blocks.

push | ravenland.org at 2:59 PM

ok, sweet, that is very encouragingthanks @Under for making that code public

corby at 3:00 PM

It will hopefully allow you to write all sorts of clients -- depending on complexity of use case you might just have js lib (wallet functions, ability to post txs to gateway) or a server side project (asset explorer or exchange)..(edited)

Tron at 3:00 PM

Yeah, thanks @Under .

RavencoinDev at 3:00 PM

What's your GitHub URL @Under ?

push | ravenland.org at 3:00 PM

https://github.com/underdarkskies/ i believeGitHub· GitHubunderdarkskies has 31 repositories available. Follow their code on GitHub.📷

RavencoinDev at 3:00 PM

Yup!

push | ravenland.org at 3:00 PM

he is truly a hero(edited)

RavencoinDev at 3:00 PM

LOL

push | ravenland.org at 3:00 PM

damn o'sgo missing everywhere

RavencoinDev at 3:01 PM

teh o's are hard... Just ask @Chatturga

push | ravenland.org at 3:01 PM

📷

Chatturga at 3:01 PM

O's arent the problem...

push | ravenland.org at 3:01 PM

📷📷

RavencoinDev at 3:02 PM

Alright we're at time and the devs are super busy. Thanks everybody for joining us.

push | ravenland.org at 3:02 PM

thanks guys

RavencoinDev at 3:02 PM

Thank you all for supporting the Raven community.📷6

corby at 3:02 PM

thanks all!

push | ravenland.org at 3:02 PM

keep up the awesome work, whilst bitcoin sv and bitcoin abc fight, another bitcoin fork raven, raven thru the night📷5

Vincent at 3:02 PM

piece!!

RavencoinDev at 3:03 PM

We're amazingly blessed to have you on this ride with us.📷5📷9📷5

Dan1666 at 3:03 PM

gg

BruceFenton at 3:03 PM

📷📷12📷4

UserJonPizza|MinePool.com|Mom at 3:55 PM

Good meeting! Excited for the new QT!!
submitted by Chatturga to u/Chatturga [link] [comments]

Let's Decentralise the World and Make World Crypto Network a Distributed Autonomous Organisation

Decentralise the World

EDIT 2014-08-01 See also pierebel0 Seed the Chain
Please read this carefully and be forthcoming with your views. It’s important to the future of World Crypto Network.
As many of you may know pierebel0 (Nick) and I have been working on an idea and since then we have been putting together diagrams and a plan.
Basically we want to get open source software to regions of the world that have poor internet connectivity and are in need of most financial innovation. This would be like an airdrop of items including:
Nick's initial idea was to produce a list of villages and towns ranked by bandwidth and we would then give each place a Bitcoin donation address.
We could use a map of the world using the open source CoinMap. A page on the World Crypto Net website called Join the Revolution. Members of the audience, hosts of the show and any willing participants in the global campaign can sign up and put themselves on the map.
We could then setup a Bitcoin Wallet in Armory and assign a Bitcoin address for every viable village and town in the world.
Our audience will be invited to vote on which town or village they wanted as to do an Open Source Airdrop on by sending bitcoins to that address. Each donation would be like a vote. We would set targets on each location based on the most cost effective way of delivering it and then let the market decide what order we should go in. We would probably want to weight it to regions that had the most potential to benefit from the project.

World Crypto Network as a DAO (Distributed Autonomous Organisation)

Now the next question that came up is how to handle the funds responsibly?
Up until now people have just trusted Thom and I and sent us money. But if we are going to practice what we preach in this brave new community then what better opportunity to try out a DAO. Recently I reinstalled Bitcoin Armory to try out the new Multisig and multipart paper backup features and I suggest the following process for discussion:
  1. Live Town Hall meeting on Youtube with plenty of advance warning with members of our audience who have followed us up until now to discuss the election process of 7 people who will be custodians of Bitcoin Armory Wallet.
Key decisions will be things like: * How the election should take place? * Using the block chain as a clock on which Bitcoin Block should it commence? e.g. the election takes place at block height #312,020
Once elected each person is given a number at random.
  1. A custodian of the funds is selected at random using the first number in the Bitcoin nonce at block #312,017 between 1 and 7. This way none of the elected 7 will know if they are going to be in charge. This should filter out any power hungry psychopaths as mostly they want control right now and not leave it to chance. We want any would be dictator to self-deselect themselves from this process.
  2. That custodian then produces an Armory wallet consisting of a 5 of 7 paper backup. Each elected member is given one each and the custodian keeps the master copy. In order for the wallet to be restored and funds to be spendable you would need 5 people out of the seven to collude or join together in protest against the custodian.
Everyone, the audience and elected 7 included are encouraged to publish their raw public keys (in hex, not the normal address) so that we can create ad hoc multi-sig wallets with one another on a project by project basis.
I would also like to include the ability for the audience to become hosts and participants and even allow them to seize the funds by co-operating with members of the elected 7. This would mean dividing up 1 of the 7 root keys in to smaller junks like with a multiple encrypted zip file or something.

Thoughts and things to consider:

What I particularly like about splitting up the keys is that we could even engineer it to make sure that no more than 2 members of staff are elected per country. That way no single authority could shut down the World Crypto Network.
It’s also important to note that the elected staff and random custodian are just admin staff. Everyone’s a leader at WCN and the role of the people at the top is to give the people at the bottom everything they need to get their job done. All the custodian is doing it making sure the web hosting is paid for and that the donations get sent to the right people.
Individuals within the organisation are still responsible for their own projects and fundraising. None of the elected 7 can stop you from soliciting money for your hard work. But they might come in handy if you want to set up a project for a 3rd party like Let’s get Nepal on a Meshnet and you would like to setup a 2 of 3 multisig wallet of which one of them could be the custodian. This would lend you credibility when you market your project and make people more likely to donate.
We could also not bother with the initial election and just self appoint the first 7 people and just rotate the duties every 15,000 blocks.
Also Thornbreaker (Jamie Nelson) mentioned that we should come up with a manifesto. I think this is a good idea and we could do it on Github or a Wiki.
Thank-you for your time, I look forward to your reading thoughts.
submitted by MrChrisJ to worldcryptonetwork [link] [comments]

How to Back Up Your Bitcoin Wallet Hack Bitcoin From Blockchain Unspent and Unconfirmed ... How to hack a bitcoin wallet (blockchain) - YouTube How to prune the blockchain in Bitcoin-Qt QT Wallet dat Recovery

How do I move my Bitcoin Core data file. Safely exit Bitcoin Core (bitcoin-qtbitcoind). Make a new secure backup copy of your wallet.dat.; Move you entire .bitcoin folder to the new location, except for bitcoin.conf which you must leave where it is in the existing .bitcoin folder. Edit bitcoin.conf to add datadir={full path to new .bitcoin folder}.; Start Bitcoin Core and check properly that ... Bitcoin-QT does have a way to change the blockchain save location, as pointed out by many other replies to this thread. What it needs is the ability to specify the location of the wallet.dat and associated files, and to run without access to the wallet file. The blockchain can live in general bulk storage, but I'm very unhappy unless my wallet.dat lives in something like a Truecrypt container. If you want to store them in D:\BitcoinData then click on "Properties" of a shortcut to bitcoin-qt.exe and add -datadir=D:\BitcoinData at the end as an example: "C:\Program Files (x86)\Bitcoin\bitcoin-qt.exe" -datadir=d:\BitcoinData Start Bitcoin, now you will see all the files are created in the new data directory. Linux 1. Install Bitcoin-Qt Since version 0.9, Bitcoin-Qt was renamed to Bitcoin Core t o reduce confusion between Bitcoin-the-network and Bitcoin-the-software. Bitcoin Core is a full Bitcoin client. It is a thick client, meaning it requires the full blockchain (explained below) on local disk to operate and expose blockchain back to the network to help relay and verify transactions. It’s very simple to change the blockchain file location if you follow the steps carefully. Moving the wallet blockchain files to another directory. Note: To move the blockchain data directory we are going to use the command line parameter. Also this works with almost any crypto currency QT wallets (Bitcoin, Litecoin, Zcash4Win, Monero, Dash, Doge, Verge, etc) Finding the wallet files and ...

[index] [49188] [34393] [34525] [19927] [9746] [25642] [45084] [31688] [41839] [3827]

How to Back Up Your Bitcoin Wallet

( Blockchain Training : https://www.edureka.co/blockchain-training ) This video on Blockchain Wallet helps you to learn following topics: 1. Why we need Bloc... Extract Private Keys from Trust Wallet - works for Bitcoin, Ethereum, Litecoin and other cryptos - Duration: 5:48. Crypto Coin Investor 3,690 views If Bitcoin is taking up too much space this is the best way to reduce the amount of space taken up by the blockchain on your computer. Save unto 60Gb of hard disk space as of 28th April. Save unto ... In this video from http://www.secureyourwallet.com we do a full review of the original Satoshi Bitcoin wallet. We do an install, look at the blockchain data,... This short tutorial explains what a Bitcoin wallet backup is and how to create it on 3 different wallets: Blockchain.info, Bitcoin-QT and MultiBit. For more information and tutorials about Bitocin ...

#